Education

SKU: EF-EF04089 | Brand: ElecFreaks

Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared t...

SKU: LB-LS6119 | Brand: Little Bird

Introducing the Vertical Wind Generator Wind Turbine-Kit, the perfect DIY project for all ages. This complete set comes with all the materials needed to assemble your very own mini wind turbine. Not only will you have...

SKU: SF-DEV-11061 | Brand: SparkFun

The Arduino Mega 2560 R3 is a microcontroller board based on the ATmega2560, offering significantly more I/O than standard Arduino boards. With 54 digital I/O pins, 16 analog inputs, and 4 hardware serial ports, it's ...

SKU: EF-EF08296 | Brand: ElecFreaks

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: LB-00191-20 | Brand: Little Bird

A classroom-ready bulk pack of 20 BBC micro:bit v2.2 boards. Each micro:bit features a built-in speaker, microphone, touch sensor, accelerometer, compass, Bluetooth, and a 5×5 LED matrix — everything students need to ...

SKU: EF-EF08297 | Brand: ElecFreaks

The Classroom Smart Home Kit includes components such as an IOT:bit expansion board, crash sensor, 180-degree servo, rainbow LED, noise sensor, light sensor, and OLED display. These components enable a wealth of funct...

SKU: DF-DFR0548 | Brand: DFRobot

Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibiliti...

SKU: LB-LS3639 | Brand: Little Bird

A 122-piece assortment of wheels, motors, and gears for quick prototyping and hands-on tinkering. This kit gives you the mechanical building blocks to create simple motorised chassis, spinning art projects, and other ...

SKU: AF-64 | Brand: Adafruit

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to...

SKU: KS-KS4033 | Brand: Keyestudio

The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwi...

SKU: EF-EF08252 | Brand: ElecFreaks

The Smart City Kit has a well-selection of IoT:bit, DHT11 sensor, soil moisture sensor, water level sensor, sonar:bit, servos and etc., we could use it to build such themes as the smart parking lot, transportation ...

SKU: SF-DEV-17288 | Brand: SparkFun

The BBC micro:bit v2 is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit v2 board. You can code, customize and control your micro:bit from anywhere! Yo...

SKU: EC-SEM00006D | Brand: Elecrow

The All-in-one Starter Kit for Micro:bit is a beginner-friendly learning platform that integrates 13 sensor modules on a single circuit board — no soldering or wiring required. Simply plug in your micro:bit and start ...

SKU: DF-ROB0156-B | Brand: DFRobot

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately.Use this kit to change your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! The Maqueen Mechanic-Beetle ki...

SKU: SF-SEN-15901 | Brand: SparkFun

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather...

SKU: EF-EF08200 | Brand: ElecFreaks

          ItemsParametersRemarksNamemicro:bit Experiment Box kitSKUEF08199/EF08200 The boardmicro:bit Coding languagemakecode\python\C++ Power supply2 x A...

SKU: AF-1739 | Brand: Adafruit

This large enclosed piezo element (30 mm diameter) converts vibration to voltage and voltage to vibration, making it useful both as a buzzer for generating tones and as a sensor for detecting knocks and impacts. The e...

SKU: SF-COM-09590 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and...