Displays

SKU: AF-5792 | Brand: Adafruit

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. The 2.1" diagonal sized display has 480x480 16-bit full-color pixels and is an IPS display, so the color looks g...

SKU: AF-5772 | Brand: Adafruit

Add a small, colourful display to any QT Py or Xiao project with the EYESPI BFF. This compact add-on board connects to EYESPI-compatible displays via an 18-pin 0.5mm pitch FPC connector, giving you a standardised way ...

SKU: DF-DFR0928 | Brand: DFRobot

A 1.8-inch IPS TFT LCD display module with 128×160 resolution and an integrated microSD card slot for reading full-colour bitmaps. Driven by the ST7735S chip over SPI (4-wire), the display offers a 120° viewing angle ...

SKU: WS-16712 | Brand: Waveshare

A large 10.3" flexible e-ink display HAT for Raspberry Pi, featuring 1872×1404 resolution (~227 DPI) with 2–16 greyscale levels. The flexible panel is thinner and lighter than standard e-Paper displays, and the IT8951...

SKU: DF-DFR0835 | Brand: DFRobot

This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 graysc...

SKU: AF-5228 | Brand: Adafruit

A raw 1.3" monochrome OLED display module with 128 × 64 pixel resolution, driven by the SH1106G controller over SPI. This is the same display used in the Adafruit MACROPAD RP2040. Key Features 1.3" Monochrome OLED ...

SKU: AF-5297 | Brand: Adafruit

The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is indi...

SKU: AF-4947 | Brand: Adafruit

The Adafruit 2.13" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 250×122 pixel display with black, red, and white ink, this breakout delivers high-contrast, d...

SKU: DF-DFR0665 | Brand: DFRobot

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI...

SKU: DF-DFR0669 | Brand: DFRobot

A 3.5" IPS TFT LCD display module with 480×320 resolution and a 5-point capacitive touchscreen. Driven by the ILI9488 display controller and GT911 touch chip, it communicates over SPI and operates at 3.3–5.5 V, making...

SKU: DF-DFR0664 | Brand: DFRobot

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible ...

SKU: AF-4367 | Brand: Adafruit

The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support a...

SKU: AF-4278 | Brand: Adafruit

A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare displa...

SKU: SF-LCD-15143 | Brand: SparkFun

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...

SKU: AF-4224 | Brand: Adafruit

The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...

SKU: AF-3651 | Brand: Adafruit

The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright 6-LED white backlight, and a built-in resistive touchscreen. It plugs directly into any Adafruit Feather board, giving you a high...

SKU: AF-684 | Brand: Adafruit

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-...

SKU: AF-1480 | Brand: Adafruit

A 2.2″ TFT LCD breakout with 320 × 240 resolution and full 18-bit colour (262,144 shades), driven by an ILI9340 (or compatible) controller over 4-wire SPI. The onboard frame buffer means even low-memory microcontrolle...

SKU: AF-1651 | Brand: Adafruit

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assemb...

SKU: AF-1673 | Brand: Adafruit

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. ...