Displays & User Interface

SKU: EF-EF04076 | Brand: ElecFreaks

OCTOPUS OLED Display is an OCTOPUS series electric brick with 128X64 OLED display.OLED display has characters of thin thickness, high brightness, self-emission, wide resolution and visual angle, wide temperature ra...

SKU: DF-DFR0664 | Brand: DFRobot

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible ...

SKU: SF-BOB-15932 | Brand: SparkFun

The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...

SKU: AF-4500 | Brand: Adafruit

The Adafruit CLUE is a sensor-packed development board built around the Nordic nRF52840 with Bluetooth Low Energy. It matches the BBC micro:bit form factor and edge-connector pinout, making it compatible with existing...

SKU: DF-DFR0646-G | Brand: DFRobot

An 8-digit green LED segment display module with I2C communication, part of the DFRobot Gravity sensor and module range. It provides a clear, bright numerical display with 16 levels of adjustable brightness, making it...

SKU: EF-EF04056 | Brand: ElecFreaks

The Octopus 0.36" Segment LED Brick is a compact 7-segment display module designed for simple numeric output. It features a 0.36-inch common anode LED display capable of showing digits 0–9 and decimal points. Operati...

SKU: EF-EF04057 | Brand: ElecFreaks

OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The  module using 0.56 inches common cathode digital tube w...

SKU: EF-EF03418 | Brand: ElecFreaks

The 8×16 LED Matrix Module is an I2C-controlled dot matrix display designed for the BBC micro:bit. It can display numbers, letters, symbols, and scrolling text, making it ideal for adding visual output to micro:bit pr...

SKU: DF-FIT0551 | Brand: DFRobot

This 7" IPS touch display connects to the LattePanda Alpha and LattePanda Delta via eDP (Embedded DisplayPort) interface. With 1024×600 resolution, 178° viewing angle, and high colour saturation, it delivers excellent...

SKU: AF-4367 | Brand: Adafruit

The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support a...

SKU: AF-4313 | Brand: Adafruit

The Adafruit 1.3" 240×240 Wide Angle TFT LCD Display Breakout with MicroSD is a compact, high-density IPS screen driven by the ST7789 controller. With 240×240 pixels at 260 PPI in full 16-bit colour, it delivers sharp...

SKU: AF-4278 | Brand: Adafruit

A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare displa...

SKU: AF-4243 | Brand: Adafruit

A flexible 2.13″ monochrome e-ink display with 212 × 104 pixel resolution, delivering crisp, paper-like visuals that remain visible even with no power applied. The high-contrast black-on-white image is excellent in di...

SKU: SF-LCD-15143 | Brand: SparkFun

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...

SKU: AF-4224 | Brand: Adafruit

The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...

SKU: DF-FIT0561 | Brand: DFRobot

An all-metal adjustable screen holder that lets you tilt displays on your desktop at your preferred viewing angle. The rotating screws provide stable elastic reinforcement, and the holder folds flat when not in use. R...

SKU: DF-DFR0554 | Brand: DFRobot

The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both...

SKU: DF-DFR0507 | Brand: DFRobot

DFRobot FireBeetle series is low-power development board designed for the IoT projects. This FireBeetle covers display module is equipped with 128x64 resolution OLED and new version of SSD1360 driver IC, us...

SKU: AF-3901 | Brand: Adafruit

The 'scope is a small, 1.3" diagonal OLED screen that doubles as an oscilloscope to help you understand the inner going-ons of your Chibi Chip. A veritable triple-threat, it packs three functions — text, volts and wav...

SKU: AF-3149 | Brand: Adafruit

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in white pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolli...