Displays & User Interface

SKU: SF-DEV-16985 | Brand: SparkFun

The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collect...

SKU: SF-LCD-16396 | Brand: SparkFun

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB de...

SKU: SF-BOB-16842 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of ...

SKU: EC-AS00121CTH | Brand: Elecrow

This Capacitive Touch Shield has 9 build-on capacitive touchpads, and the other 3 electrodes for further usage. With this shield, you can have a total of 12 touch-sensitive buttons. This Shield uses the MPR121 which i...

SKU: EC-CDE20032P | Brand: Elecrow

An Arduino Uno shield that makes it easy to drive a 16×32 RGB LED matrix panel with a HUB75 connector. Instead of wiring up 12 individual jumper wires, this shield provides a matching 2×8 IDC connector for a clean, re...

SKU: AF-4567 | Brand: Adafruit

The Adafruit 2.23" Monochrome OLED Bonnet gives your Raspberry Pi a bright, high-contrast display that's easy to read from across the room. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and star...

SKU: DF-DFR0646-R | Brand: DFRobot

An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and da...

SKU: DF-DFR0645-R | Brand: DFRobot

A 4-digit 7-segment LED display module from DFRobot's Gravity series. This red LED display communicates over I2C, making it easy to wire up with just two data lines and compatible with a wide range of microcontrollers...

SKU: DF-DFR0645-G | Brand: DFRobot

The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2...

SKU: AF-4444 | Brand: Adafruit

The Adafruit PyPortal Titano is the large-screen version of the popular PyPortal, upgraded to a 3.5" display with twice the pixels (320×480 vs 320×240). Build IoT dashboards, touch screen interfaces, and connected dis...

SKU: AF-4520 | Brand: Adafruit

The Adafruit 1.3" 240×240 Wide Angle IPS TFT Display is a bare display module — the same screen used in the Adafruit CLUE and Mini PiTFT 1.3". It delivers 240×240 pixels of 16-bit full colour with 80° viewing angles i...

SKU: AF-4446 | Brand: Adafruit

The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect you...

SKU: EF-EF04058 | Brand: ElecFreaks

A common cathode alphanumeric LED display module driven by the HT16K33 chip over I2C. The 0.56-inch digit height makes it suitable for displaying letters, numbers, and basic symbols in electronics projects and interac...

SKU: DF-DFR0514 | Brand: DFRobot

This is a 2*16 character RGB LCD+Keypad plate for Raspberry Pi. We made improvements in the wiring connection based on the previous LCD display as well as left out the contrast adjustment function, so the product can ...

SKU: DF-DFR0596 | Brand: DFRobot

The 64×32 Flexible RGB LED Matrix with 5mm pitch from DFRobot offers a lightweight, bendable display with 2048 individually addressable RGB LEDs. Its flexible PCB allows it to conform to curved surfaces, making it ide...

SKU: AF-4311 | Brand: Adafruit

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade...

SKU: SF-COM-15290 | Brand: SparkFun

Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun...

SKU: FT-OLSH | Brand: Freetronics

Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connecte...

SKU: AF-877 | Brand: Adafruit

Drive 4-digit 0.56" tall 7-segment displays with ease using this HT16K33-based I2C backpack. The driver handles all LED multiplexing over I2C, keeping your wiring simple — just two data pins for full numeric display w...

SKU: PR-PIM353 | Brand: Little Bird

scroll:bit is a little display with a lot of pixels! Its 119 bright white LEDs are perfect for scrolling messages with your micro:bit, or for animations, graphs, and more! Just slot in your micro:bit, then code scr...