DFRobot

SKU: DF-DFR1138 | Brand: DFRobot

##Introduction The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offeri...

SKU: DF-SEN0619 | Brand: DFRobot

The DFRobot Gravity: BMM350 3-axis geomagnetic sensor is designed to measure magnetic fields across three vertical axes and functions as a compass. Utilizing Bosch's patented FlipCore technology, this sensor provides ...

SKU: DF-DFR0975-U | Brand: DFRobot

FireBeetle 2 ESP32-S3-U is a high-performance main controller built around the ESP32-S3-WROOM-1U-N16R8 module. ESP32-S3-WROOM-1U-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for ne...

SKU: DF-SEN0556 | Brand: DFRobot

An infrared proximity sensor that detects objects at distances of 10 ±5 mm to 80 ±20 mm by measuring reflected IR energy. It outputs a simple high/low digital signal, making it easy to integrate with Arduino and other...

SKU: DF-SEN0536 | Brand: DFRobot

The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...

SKU: DF-SEN0523 | Brand: DFRobot

This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outpu...

SKU: DF-TEL0149 | Brand: DFRobot

Note: Gravity: BLE sensor beacons need to be configured using the 3.3V USB-TTL tool. This Gravity wireless BLE Sensor Beacon with built-in 11-bit ADC is capable of collecting data from digital and analog sensors a...

SKU: DF-DFR1026 | Brand: DFRobot

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...

SKU: DF-DFR0936 | Brand: DFRobot

This shield with a 16×2 RGB LCD screen could bring you a brand-new experience with an LCD screen!The RGB LCD shield extends all IOs of Arduino UNO on the back, by which you can connect with modules like sensors, LEDs,...

SKU: DF-SEN0500 | Brand: DFRobot

This compact multifunctional environmental sensor combines four professional sensor chips into a single breakout board: SHTC3 (temperature and humidity), BMP280 (barometric pressure), VEML7700 (ambient light), and ML8...

SKU: DF-SEN0482 | Brand: DFRobot

The wind direction sensor is a professional meteorological instrument used to measure horizontal wind direction. It integrates a hall sensor inside. The shell and weather vane is made of aluminum alloy material and us...

SKU: DF-DFR0828 | Brand: DFRobot

When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is ...

SKU: DF-DFR0845 | Brand: DFRobot

This active, isolated RS485 to UART signal transfer module comes with protection circuits such as power isolation and TVS.  Compatible with most main controllers, it has the characteristics of fast communication ...

SKU: DF-SEN0390 | Brand: DFRobot

A high-precision ambient light sensor housed in a transparent semisphere case for optimal light-gathering performance. With a wide 0–200 klx detection range and I2C communication, this sensor is ideal for applications...

SKU: DF-DFR0650 | Brand: DFRobot

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low powe...

SKU: DF-DFR0648 | Brand: DFRobot

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size,...

SKU: DF-SEN0312 | Brand: DFRobot

The ME007YS is a waterproof ultrasonic distance sensor designed for non-contact liquid level measurement and other distance sensing applications. With an IP67-rated sealed probe and UART serial output, it delivers rel...

SKU: DF-SEN0240 | Brand: DFRobot

The Gravity Analog EMG Sensor by OYMotion detects surface electromyography (sEMG) signals to measure muscle and neural activity. The sensor amplifies the tiny sEMG signal (±1.5 mV) by 1000× and filters noise through d...

SKU: DF-SEN0237-A | Brand: DFRobot

This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers. This product is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many wa...

SKU: DF-FIT0180 | Brand: DFRobot

This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It changes resistance depending on the amount of light it is exposed to. Thes...