Connectivity

SKU: RB-BLEMINI | Brand: Little Bird

BLE Mini requires only a serial port for communication so it supports all major development platforms that have UART interface including Arduino, Raspberry Pi, Netduino, BeagleBone etc. In addition, we provide you wit...

SKU: SF-WIG-14271 | Brand: SparkFun

With Single-Board Computers (SBCs) on the rise, it is a good idea to have an easy way to interface with them. Operating on a 2.4GHz frequency, the Multimedia Wireless Keyboard possesses a normal-sized key layout, medi...

SKU: SF-KIT-14051 | Brand: SparkFun

The SparkFun Wireless Joystick Kit gives you a customisable wireless controller for XBee-based projects. Built around the SAMD21 microcontroller, it provides a flexible alternative to hobby RC transmitters — configure...

SKU: SF-COM-00690 | Brand: SparkFun

The Nordic Semiconductor nRF24L01+ is a 2.4 GHz transceiver IC with an enhanced feature set over the original nRF24L01, including improved range, auto-acknowledge, auto-retransmit, and six data pipes (Multiceiver). It...

SKU: SF-BOB-00573 | Brand: SparkFun

This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. Note: This breakout board was originally designed for a SIM socket with a switch for card detection. We have since switched...

SKU: DF-DFR0262-AC | Brand: DFRobot

The Arduino GSM Shield allows an Arduino board to connect to the internet, make and receive voice calls, and send and receive SMS messages. It uses the Quectel M10 radio modem and can be controlled via AT commands or ...

SKU: SF-WRL-13804 | Brand: SparkFun

This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-en...

SKU: DF-TEL0083-A | Brand: DFRobot

This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. T...

SKU: AF-2937 | Brand: Adafruit

One can never have enough socks, or USB ports. Add some more USB and WifI capability to your Raspberry Pi or, really, any kind of computer with this USB 2.0 and WiFi Hub! This handy combo-hub has 3 USB 2....

SKU: SF-CAB-11304 | Brand: SparkFun

There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn’t one of them. Don’t worry, though, we’ve got you covered. This 6ft converter plugs into your computer’s USB por...

SKU: AF-361 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC clear tag is a compact disc-shaped token commonly used for laundry tracking, garment identification, and asset tagging. The transparent housing makes the embedded antenna coil visible. Th...

SKU: SF-KIT-13198 | Brand: SparkFun

This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID car...

SKU: AF-3230 | Brand: Adafruit

The Adafruit Radio FeatherWing RFM69HCW @ 433 MHz adds short-to-medium range packet radio to any Feather board. Based on the SX1231 transceiver, this FeatherWing provides FSK packet radio with built-in AES-128 encrypt...

SKU: AF-3586 | Brand: Adafruit

YARD Stick One (Yet Another Radio Dongle) from Great Scott Gadgets can transmit or receive digital wireless signals at frequencies below 1 GHz. It uses the same radio circuit as the popular IM-Me. The radio...

SKU: AF-3585 | Brand: Adafruit

ANT700 from Great Scott Gadgets is a lightweight telescopic antenna designed for operation from 300 MHz to 1100 MHz. Its total length is configurable from 9.5 cm to 24.5 cm. ANT700 is constructed of stainless steel...

SKU: AF-5889 | Brand: Adafruit

This compact wireless development board gives you a full-featured ESP32 platform in the familiar ItsyBitsy format. It uses the ESP32 PICO ECO V3 in an FCC-certified ESP32 Pico module, combining a dual-core 240MHz proc...

SKU: AF-6475 | Brand: Adafruit

Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status pa...

SKU: SF-KIT-16327 | Brand: SparkFun

Build a movable camera system around a Raspberry Pi Zero W with this kit. It brings together the Zero W, Raspberry Pi Camera Module V2 and SparkFun Pi Servo pHAT to create a pan/tilt camera for IoT projects.Use it for...

SKU: SF-KIT-15209 | Brand: SparkFun

This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Read...

SKU: SF-GPS-26916 | Brand: SparkFun

This compact high-precision positioning board combines a Quectel LG290P GNSS RTK receiver with an Espressif ESP32-PICO-MINI-02 MCU module. It runs SparkFun’s RTK Everywhere firmware, letting it operate as a base stati...