Connectivity

SKU: AF-4363 | Brand: Adafruit

Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL ...

SKU: AF-4269 | Brand: Adafruit

This simple spring antenna matches great with any of our 900MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder them easily.They are compact, only 17.5mm/0.68" long, an...

SKU: AF-4285 | Brand: Adafruit

Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: EF-EF08204 | Brand: ElecFreaks

ELECFREAKS Smart Science IoT Kit is developed based on loT:Bit, a new breakout board compatible with science sensors such as the ultrasonic sensor, dust sensor, light sensor and water level sensor,.including RTC Timin...

SKU: AF-4264 | Brand: Adafruit

Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your...

SKU: AF-4000 | Brand: Adafruit

The Adafruit Metro M4 Express AirLift combines the powerful ATSAMD51J19 ARM Cortex M4 processor with an on-board ESP32 WiFi co-processor — all in the standard Metro/UNO shield-compatible form factor. With 120 MHz cloc...

SKU: AF-4201 | Brand: Adafruit

Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: ET-1734951 | Brand: Little Bird

A 10-metre Cat 5e Ethernet cable with RJ45 plugs on both ends. Suitable for connecting a Raspberry Pi, computer, or other networked device to a router, switch, or hub. Specifications Category – Cat 5e Length – 10 ...

SKU: AF-3792 | Brand: Adafruit

The Adafruit IO+ Subscription Pass gives you one full year of Adafruit IO+ — the upgraded tier of Adafruit's cloud IoT platform. Your upgrade code is sent via email and can be redeemed at io.adafruit.com on any accoun...

SKU: SF-GPS-14987 | Brand: SparkFun

This tri-band GNSS antenna is ideal for GPS L1, GLONASS L1, and Beidou B2 reception. At 45x45mm it is a large ceramic antenna with an incredible 38dB LNA gain.This antenna works well with the GPS-RTK providing recepti...

SKU: AF-3807 | Brand: Adafruit

Ever wanted your own Linux-based IoT computer? A small one, that can be battery powered? The Onion Omega2 is sort of in-between a microcontroller (like an Arduino/CircuitPython/MakeCode running chip) and a full-fle...

SKU: SF-DEV-14972 | Brand: SparkFun

The Neutis Development Kit from Emlid is a quad-core system-on-module (SoM) development platform based on the Neutis N5 module. It runs a Yocto-based Linux BSP with an up-to-date kernel, powered by a 64-bit ARM Cortex...

SKU: AF-3979 | Brand: Adafruit

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabi...

SKU: AF-2829 | Brand: Adafruit

The Feather 32u4 Bluefruit LE combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging in one compact board. BLE is supported by all modern smartphones and...

SKU: DF-DFR0477 | Brand: DFRobot

The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...

SKU: AF-919 | Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter sol...

SKU: AF-920 | Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter sol...

SKU: AF-944 | Brand: Adafruit

A 100 mm (4″) swivel dipole antenna with 2 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The swivel joint lets you angle the antenna for optimal sign...

SKU: DF-DFR0492 | Brand: DFRobot

DFRobot FireBeetle series are low power consumption microcontrollers designed for Internet of Things (IoT) development. This Bluetooth controller combines Bluetooth Low Energy 4.1 with Arduino controller, offering...

SKU: DF-TEL0110 | Brand: DFRobot

CurieCore is probably the last publicly released Intel Curie-based developer product on the market. CurieCore was born for professional developers and players based on Curie's product development.  We think Inte...