Connectivity

SKU: SF-DEV-22692 | Brand: SparkFun

The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with o...

SKU: SF-DEV-21307 | Brand: SparkFun

WVR is a next-generation sample player powered by an ESP32. WVR features 8GB of memory and an advanced Web GUI where users upload audio and manage configuration and firmware. WVR is Arduino compatible and open-source,...

SKU: SF-CAB-21739 | Brand: SparkFun

A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior perfor...

SKU: AF-5750 | Brand: Adafruit

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: Thi...

SKU: DF-TEM2022C-EN-1 | Brand: DFRobot

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil mo...

SKU: DF-TEM2022A-EN-1 | Brand: DFRobot

We're excited to bring you three EEDU kits designed to make it easy for you to get started with AI, IoT, and environmental sensing using programming hardware. Each kit is built around an Arduino-compatible, ESP32-base...

SKU: SF-SEN-21219 | Brand: SparkFun

The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge, because it integrates Syntiant’s powerful NDP120 Neural Decision processor to run multiple AI algorithms, ...

SKU: SF-WRL-20409 | Brand: SparkFun

The SparkFun MicroMod Cellular Function Board adds cellular connectivity to the MicroMod ecosystem using the Blues Wireless Notecard (NOTE-NBGL-500). The Notecard includes a built-in SIM card with a 10-year data plan ...

SKU: SF-WRL-20855 | Brand: SparkFun

Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes. Utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. ...

SKU: SF-SWG-20712 | Brand: SparkFun

Stop guessing which antenna is which. This sticker sheet lets you label your antennas with their frequency, so you can quickly identify the right one when you reach into your parts drawer. Each sheet includes 75 stic...

SKU: DF-TEL0159 | Brand: DFRobot

SIM8262E-M2 is a 5G wireless communication module that supports 5G NR (NSA/SA), LTE-FDD, LTE-TDD, and WCDMA, and can meet the 3GPP R16NR specification. The module supports maximum 3.0Gbps downlink rate. It has optiona...

SKU: SF-DEV-19957 | Brand: SparkFun

The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wirele...

SKU: DF-TEL0156 | Brand: DFRobot

This 50-metre single-mode duplex fibre jumper features SC-SC connectors with ceramic ferrules, delivering reliable long-distance optical communication. The dual-core design (two single-core fibres) with a 2 mm wire di...

SKU: AF-5459 | Brand: Adafruit

A clear 13.56 MHz RFID/NFC keychain fob with an NTAG203 chip. Commonly used for transit passes, information sharing, and contactless identification, this tag contains a small RFID chip and antenna that is passively po...

SKU: SF-GPS-19576 | Brand: SparkFun

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you stay in doors and warm at your keyboard. This 2m (6.5ft) magnetic mount...

SKU: AF-5438 | Brand: Adafruit

The Adafruit ESP32 Feather V2 with w.FL Antenna is identical to the standard ESP32 Feather V2 but replaces the PCB trace antenna with a w.FL (MHF3/IPEX3) connector for attaching an external antenna. This makes it idea...

SKU: AF-5432 | Brand: Adafruit

The Spresense LTE Extension Board adds LTE connectivity to the Spresense main board and carries an onboard antenna and a nanoSIM cardholder. It also extends the interfaces of the Spresense main board with multiple mic...

SKU: WS-21708 | Brand: Waveshare

A 5G cellular HAT for Raspberry Pi built around the SIM8202G-M2 module on Qualcomm's Snapdragon X55 platform. Supports 5G NSA and SA networking alongside 4G and 3G fallback, plus multi-constellation dual-band GNSS pos...

SKU: WS-21705 | Brand: Waveshare

A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting...

SKU: AF-5402 | Brand: Adafruit

RFID made easy! RFID Wiz is the easiest way to include RFID in all your projects. Their ONE-TOUCH training system will have you reading RFIDs in no time! Designed for art installations, museums, escape rooms, etc but ...