Components

SKU: SF-PRT-16538 | Brand: SparkFun

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for easy wire connection purposes. Similar to screw terminals, Poke Home Co...

SKU: SF-COM-16347 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10 or even 50, maybe you need a who...

SKU: SF-PRT-15900 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15899 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15898 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: AF-4492 | Brand: Adafruit

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 1515 (1.5mm x 1.5mm) RGB LED is designed to be surface-mount soldered and is the most compact w...

SKU: SF-BOB-15932 | Brand: SparkFun

The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...

SKU: EF-EF03425 | Brand: ElecFreaks

Ring:bit car V2 lights-bar module is the dedicated module which designed for Ring:Bit Car V2. It brings you beautiful mutiple color with simple assemble.Come with 8 Rainbow full color LEDs. You can update your ring:bi...

SKU: EF-EF04056 | Brand: ElecFreaks

The Octopus 0.36" Segment LED Brick is a compact 7-segment display module designed for simple numeric output. It features a 0.36-inch common anode LED display capable of showing digits 0–9 and decimal points. Operati...

SKU: EF-EF04009 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: EF-EF04057 | Brand: ElecFreaks

OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The  module using 0.56 inches common cathode digital tube w...

SKU: EF-EF10108 | Brand: ElecFreaks

This is a long flexible orange cable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright orangelight and the wire will not be heated. It is similar to a lo...

SKU: EF-EF10119 | Brand: ElecFreaks

This is a long flexible white cable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright whitelight and the wire will not be heated. It is similar to a long...

SKU: EF-EF04063 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EF-EF04036 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EF-EF04034 | Brand: ElecFreaks

The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadbo...

SKU: EF-EF04101 | Brand: ElecFreaks

 driver module is used for driving the EL or EL panel in the market, the EL is also called the cold light neon tube which is apyretic and water-proof that can also be wound to any shape. Multiple colors like red,...

SKU: EF-EF10113 | Brand: ElecFreaks

This is a long flexible blue cable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright blue light and the wire will not be heated. It is similar to a long ...

SKU: EF-EF04062 | Brand: ElecFreaks

A green 5 mm LED module from the Octopus Electronic Bricks range. It connects to Arduino or micro:bit via a 3-pin sensor cable for breadboard-free, plug-and-play wiring. Control it with a digital pin (LOW = on, HIGH =...

SKU: EF-EF04038 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...