Components

SKU: DF-DFR0031-W | Brand: DFRobot

Piranha LED light module, and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to Arduino, the...

SKU: AF-959 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright blue dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SCL)...

SKU: AF-1047 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded blue LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! There are 16 pins on the side, 8 on e...

SKU: AF-1056 | Brand: Adafruit

You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated...

SKU: AF-1055 | Brand: Adafruit

A sturdy adjustable mount for laser diode modules. The set-screw clamp holds the laser securely, while the tilt mechanism lets you aim the beam precisely. A flat mounting plate with two slotted holes makes it easy to ...

SKU: AF-4121 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of cool white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmab...

SKU: AF-1003 | Brand: Adafruit

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). ...

SKU: AF-4117 | Brand: Adafruit

A flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow in purple. Unlike traditional neon, it requires no special transformers or glass tubing — just connect 9–12 V DC and i...

SKU: AF-1112 | Brand: Adafruit

Stack multiple plates, breakouts etc onto your Raspberry Pi with this custom-made extra-tall and extra-long 2x13 female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi...

SKU: AF-1195 | Brand: Adafruit

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no l...

SKU: AF-1163 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 32-pin QFN or TQFP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 32-pin QFP footprint while the other support...

SKU: AF-1210 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 14-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 14-pin TSSOP footprint while the other sup...

SKU: AF-1211 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 12-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 12-pin TSSOP footprint while the other sup...

SKU: SF-DEV-14779 | Brand: SparkFun

The LumiDrive LED Driver is SparkFun’s foray into all things Python on micro-controllers. With the SparkFun LumiDrive you will be able to control and personalize a whole strand of APA102s directly from the board itsel...

SKU: AF-1182 | Brand: Adafruit

The SK8 is an aluminium cast shaft support for 8mm linear rails. Simply slide the rail through the clamp, tighten the clamp screw to lock it in place, then bolt the support down to your frame using up to M6 bolts. Eas...

SKU: AF-1265 | Brand: Adafruit

A bright yellow 4-digit 7-segment clock display with a large 1.2" digit height — perfect for clocks, timers, and counters. Each segment is ultra-bright at 36mcd and constructed from two LEDs in series for even colour ...

SKU: SF-COM-15093 | Brand: SparkFun

Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with...

SKU: AF-4029 | Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors o...

SKU: AF-4045 | Brand: Adafruit

This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even...

SKU: AF-1259 | Brand: Adafruit

A heavy-duty cast aluminium double corner brace for joining 20×20mm aluminium extrusion at 90° angles. Stronger than extruded corner supports, with four mounting holes (two per side) for a more secure and rigid connec...