Components

SKU: AF-3983 | Brand: Adafruit

Put your project in stealth mode with these super slim, super tiny, and silent Mini Soft Touch Push-button Switches. They're less 'clicky' than tactile switches, they have a rubbery elastomer that feels good to p...

SKU: EF-EF03420 | Brand: ElecFreaks

The Christmas Tree Rainbow LED is a festive, tree-shaped board featuring 6 individually addressable NeoPixel RGB LEDs. Designed for the BBC micro:bit, it connects with crocodile clips — no expansion board required — a...

SKU: PI-COM0002 | Brand: Pimoroni

This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving...

SKU: AF-1476 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...

SKU: AF-3488 | Brand: Adafruit

This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA fro...

SKU: TB-RR2558 | Brand: Little Bird

A pack of two 220Ω carbon film resistors rated at 1W continuous power. These through-hole axial resistors are suitable for general-purpose electronics projects requiring higher power handling than standard ¼W resistor...

SKU: LB-00339 | Brand: Little Bird

This is a 5-pin female header, with extra long legs  Pins are spaced by 0.1".    

SKU: LB-LR0022 | Brand: Little Bird

It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive- Ground**Specifications:**- 600mW MAX (50mA at 12v)

SKU: AF-1620 | Brand: Adafruit

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your elec...

SKU: AF-1789 | Brand: Adafruit

This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will ...

SKU: AF-1792 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-1863 | Brand: Adafruit

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendl...

SKU: AF-1875 | Brand: Adafruit

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V de...

SKU: AF-2222 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...

SKU: AF-2187 | Brand: Adafruit

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Rasp...

SKU: AF-2343 | Brand: Adafruit

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...

SKU: AF-2337 | Brand: Adafruit

Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories w...

SKU: SF-PRT-14311 | Brand: SparkFun

These headers are made to work with the SparkFun ESP32 Thing and ESP32 Power Control Shield boards. Each set of headers makes your ESP32 Thing easily stackable with the Power Control Shield or other applications. This...

SKU: SF-COM-09340 | Brand: SparkFun

This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...

SKU: SF-PRT-09139 | Brand: SparkFun

This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1"...