Components

SKU: AF-805 | Brand: Adafruit

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, b...

SKU: DF-FIT0563 | Brand: DFRobot

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank water. It comes with an inlet valve, you can adjust the water inflow manually. It works quietly with the...

SKU: EF-EF04098 | Brand: ElecFreaks

This NeoPixel-compatible rainbow LED strip features 10 individually addressable WS2812B RGB LEDs with a standard 3-pin GVS connector for easy plug-and-play use. Both ends have connectors, allowing multiple strips to b...

SKU: LB-LS0317-220 | Brand: Little Bird

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 220 ohm resistors make excellent LED current limiters and are great for general...

SKU: LB-LR0309-6 | Brand: Little Bird

A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders....

SKU: LB-LR0046 | Brand: Little Bird

The 5V 1-Channel Optocoupler Relay Module provides safe, isolated switching of high-voltage loads from a microcontroller. An onboard SMD optocoupler isolates the control circuit from the relay, protecting your Arduino...

SKU: AF-160 | Brand: Adafruit

The PS1240 is a compact piezo buzzer for generating beeps, tones, and alerts in electronic projects. Drive it with a 3–30 V peak-to-peak square wave from a timer or microcontroller. It produces its loudest output arou...

SKU: LB-LS0513 | Brand: Little Bird

M3 Nylon Screw Black Hex Screw Nut Nylon PCB Standoff Assortment Kit 250pcs M3*6+6mm        25pcs M3*8+6mm        25pcs M3*10+6mm   &n...

SKU: AF-856 | Brand: Adafruit

The MCP3008 is an 8-channel, 10-bit analogue-to-digital converter (ADC) with an SPI interface. It adds analogue input capability to microcontrollers and microcomputers that lack a built-in ADC — such as the Raspberry ...

SKU: LB-LR0271 | Brand: Little Bird

A bulk pack of 500 standard 5 mm through-hole LEDs in five colours — perfect for classrooms, makerspaces, LED throwies, and any project that needs a large quantity of indicator lights on hand. Key Features 500 LEDs...

SKU: AF-2780 | Brand: Adafruit

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon ...

SKU: PH-TPH-017 | Brand: PiHut

The 3D RGB Xmas Tree sits on top of your Raspberry Pi and features 25 individually addressable RGB LEDs that you can control with Python. Change colours, adjust brightness, create fading effects, or build your own fes...

SKU: AF-261 | Brand: Adafruit

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...

SKU: SF-COM-11118 | Brand: SparkFun

Super bright 10 mm white through-hole LEDs with high luminous output of 16,000–20,000 mcd. Their large size and narrow 30° viewing angle make them ideal for focused lighting, indicators, and decorative projects. Spec...

SKU: LB-10M-RESISTOR | Brand: Little Bird

A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and le...

SKU: LB-LR0289 | Brand: Little Bird

This passive buzzer is a simple sound-making component for Arduino, microcontroller and electronics projects. Unlike an active buzzer, it needs a changing signal to produce sound rather than generating a tone automati...

SKU: LB-LS2225-R-24 | Brand: Little Bird

A ring of 24 individually addressable WS2812 RGB LEDs in the 5050 package. Each LED contains an integrated driver chip, so only a single data pin is needed to control all 24 LEDs from your microcontroller. The rings ...

SKU: LB-LS0014 | Brand: Little Bird

Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 /...

SKU: LB-LR0013 | Brand: Little Bird

This RGB LED module gives your microcontroller project a simple way to add full-colour light. It uses a common-cathode through-hole RGB LED, with separate red, green and blue channels for mixing colours.Each colour ch...

SKU: AF-5583 | Brand: Adafruit

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!Socket headers are like the duct tape of electronics. They're great for connecting things, ...