Components

SKU: PI-COM1111 | Brand: Pimoroni

Colour-coded GPIO pins that make locating that ground or power connection you need super simple! These 40-pin 2x20 male headers from our friends at The Pi Hut can be used on a Raspberry Pi Zero and are colour-coded...

SKU: LB-LORIKEET | Brand: Little Bird

The Little Bird Lorikeet is an Australian-made RGB LED board featuring five individually addressable WS2812B LEDs (NeoPixel-compatible). Control all five LEDs from a single microcontroller pin using the WS2812B serial...

SKU: LB-LS2582 | Brand: Little Bird

This small soldering kit is a fun practice project for anyone building confidence with through-hole soldering. Once assembled, the LEDs flash across the board in sequence, creating a simple running-light effect.The fl...

SKU: LB-LS0317-10K | Brand: Little Bird

Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboa...

SKU: AF-5582 | Brand: Adafruit

A pair of 20-pin stacking headers designed for the Raspberry Pi Pico. Solder them to your Pico and you can plug it into a breadboard or perma-proto while also attaching add-on boards or circuitry on top. They're also ...

SKU: LB-LS3507 | Brand: Little Bird

This 2×20 pin tall female header extends the reach of any board with a standard 40-pin GPIO layout, including the Raspberry Pi, Google Coral, and NVIDIA Jetson. At 16 mm tall with standard 0.1″ (2.54 mm) spacing, it p...

SKU: LB-LS2921 | Brand: Little Bird

Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for  prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiomete...

SKU: LB-LR0282 | Brand: Little Bird

This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ. ...

SKU: LB-LR0679 | Brand: Little Bird

A comprehensive through-hole resistor assortment in a labelled plastic storage case. Includes 17 different values from 0Ω to 1MΩ, with 525 resistors total — all 1/4W metal film with 1% tolerance. A colour code guide i...

SKU: RP-RP2040 | Brand: Raspberry Pi Ltd

The RP2040 is Raspberry Pi's first microcontroller chip, featuring dual ARM Cortex-M0+ cores running at up to 133 MHz. Built on a 40 nm process in a compact 7 × 7 mm QFN-56 package, it delivers high performance at low...

SKU: SF-PRT-00124 | Brand: SparkFun

This is a time saving kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100,...

SKU: LB-LR0288 | Brand: Little Bird

A simple 5V active buzzer that generates a tone using its built-in oscillator. Just apply a DC voltage and it sounds — no additional signal generation or driver circuit required. Ideal for adding audible alerts, alarm...

SKU: LB-LS0060 | Brand: Little Bird

Keep a handy assortment of electrolytic capacitors on the bench for prototyping, repairs and general electronics work. This kit includes 200 capacitors across a range of capacitance values and voltage ratings.The capa...

SKU: AF-805 | Brand: Adafruit

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, b...

SKU: LB-PT9053 | Brand: Little Bird

A comprehensive assortment of 600 small stainless steel screws and nuts, perfect for repairing watches, glasses, electronics, and other precision devices. Sizes include M1, M1.2, M1.4, and M1.6 threads. All 12 variet...

SKU: AF-562 | Brand: Adafruit

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will ...

SKU: DF-FIT0563 | Brand: DFRobot

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank water. It comes with an inlet valve, you can adjust the water inflow manually. It works quietly with the...

SKU: EF-EF04098 | Brand: ElecFreaks

This NeoPixel-compatible rainbow LED strip features 10 individually addressable WS2812B RGB LEDs with a standard 3-pin GVS connector for easy plug-and-play use. Both ends have connectors, allowing multiple strips to b...

SKU: LB-LS0317-220 | Brand: Little Bird

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 220 ohm resistors make excellent LED current limiters and are great for general...

SKU: LB-LR0309-6 | Brand: Little Bird

A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders....