Components

SKU: AF-5888 | Brand: Adafruit

This handy STEMMA board lets you control 'true analog' LED strips and other PWM-able LEDs from a NeoPixel-compatible data line, without the usual extra wiring of separate driver FETs. A WS2811F handles the 800KHz NeoP...

SKU: SF-BOB-29195 | Brand: SparkFun

This compact breakout board makes it easy to work with a male DE9 connector, commonly referred to as DB9. It brings the connector out to a maker-friendly plated through-hole header, so you can wire it into prototypes,...

SKU: SF-BOB-29196 | Brand: SparkFun

This compact breakout board makes it easy to bring a female DE9 connector, often called DB9, onto a breadboard or into a custom wiring harness.All nine connector pins are broken out to 0.1in-spaced plated through-hole...

SKU: SF-PRT-26987 | Brand: SparkFun

This 52-pin connector is a 2-in-1 socket for mSATA and PCI Express Mini Card applications. It is supplied as an individual female connector for use on your own PCB designs.The connector is designed for surface-mount s...

SKU: SF-DEV-21869 | Brand: SparkFun

This shield gives your MyoWare 2.0 Muscle Sensor an easy visual output, using a blue 10-segment bar graph to show the magnitude of a target muscle’s signal. As muscle activation increases, the LEDs climb further up th...

SKU: AF-6311 | Brand: Adafruit

This breakout makes the ANO rotary encoder wheel much easier to use in a breadboard or wired prototype. The encoder is a distinctive navigation control, with a clicky scroll-wheel feel reminiscent of early iPod interf...

SKU: SF-PRT-29327 | Brand: SparkFun

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extr...

SKU: SF-COM-30157 | Brand: SparkFun

The ATMEGA2560-16AUR is a high-performance, low-power 8-bit microcontroller based on the Microchip AVR enhanced RISC architecture. It is the controller IC used at the heart of the Arduino Mega and many other advanced ...

SKU: SF-COM-27909 | Brand: SparkFun

This compact module provides a USB to serial UART interface using the FT231X family, making it a straightforward way to add USB connectivity to UART-based projects.It supports full modem control and works as a USB to ...

SKU: SF-COM-29754 | Brand: SparkFun

Add USB serial connectivity to a microcontroller design with this compact FT230X USB bridge IC. It converts USB 2.0 to a UART interface, making it a straightforward way to provide USB communication in embedded project...

SKU: SF-COM-24837 | Brand: SparkFun

The WS2812B is a compact 5050-sized SMD RGB LED with an integrated control circuit, making each LED individually addressable. Often referred to as a “NeoPixel”, it is widely used for addressable lighting projects and ...

SKU: SF-COM-18435 | Brand: SparkFun

This through-hole resistor is a simple, breadboard-friendly passive component for prototyping and general electronics work. It is commonly used with breadboards and perf boards, making it handy for pull-ups, pull-down...

SKU: SF-COM-25168 | Brand: SparkFun

This surface-mount resistor is a compact 2.7 kOhms part for electronics prototyping, repairs and small production runs.It is rated for 1/10W power dissipation with ±1% tolerance, making it suitable for circuits where ...

SKU: SF-COM-30026 | Brand: SparkFun

This is a basic 33nF ceramic capacitor rated for 25V, suitable for general electronics builds, repairs and prototyping where a compact surface-mount capacitor is needed.It has a ±10% tolerance and an SMD/SMT terminati...

SKU: SF-COM-30219 | Brand: SparkFun

This general-purpose surface-mount resistor provides a 560k Ohm value in a compact standard 0603 package, making it suitable for dense PCB layouts and everyday electronics work.It uses a thick film composition and is ...

SKU: SF-PRT-29360 | Brand: SparkFun

This hookup cable provides a simple way to connect to a RockBLOCK 9704 module. It has a 2x8 C-Grid III female connector on one end and unterminated bare wires on the other.The 300mm length is suited to making your own...

SKU: SF-PRT-28008 | Brand: SparkFun

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up wi...

SKU: AF-2836 | Brand: Adafruit

Add individually addressable red, green, blue and white pixels to costumes, signs, props and ambient lighting projects. Each NeoPixel contains separate RGB and white emitters, so you can create colourful effects as we...

SKU: AF-2841 | Brand: Adafruit

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel combines red, green, blue and white elements, giving you colourful effects plus a dedicated white chan...

SKU: SF-PRT-27882 | Brand: SparkFun

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the ne...