Components

SKU: AF-610 | Brand: Adafruit

A panel-mount DC barrel jack that accepts standard 2.1 mm power plugs. The extra-long threaded body fits panels up to 8 mm thick (5/16″), making it suitable for wooden enclosures and thicker project boxes — not just s...

SKU: DF-FIT0455-Y | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: DF-FIT0455-R | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: DF-FIT0455-W | Brand: DFRobot

A self-locking illuminated push button with a white LED indicator. When pressed, the button locks into position and the LED lights up; press again to release. The built-in LED includes a resistor for direct 5–12V oper...

SKU: DF-FIT0455-B | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: SF-PRT-10359 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on ...

SKU: AF-1853 | Brand: Adafruit

The Small 1.2" (30 mm) 8x8 Bright Square LED Matrix + Backpack combines a vivid blue LED matrix with an I2C backpack driver board, making it simple to add a compact display to any microcontroller project without compl...

SKU: SF-PRT-12754 | Brand: SparkFun

A 6-pin British Telecom Digital (BTD) female connector, commonly used with Vernier digital sensors for science education. The BTD format is similar to RJ11 but uses a side-mounted lock instead of a bottom-mounted hook...

SKU: SF-PRT-12748 | Brand: SparkFun

A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount...

SKU: AF-1854 | Brand: Adafruit

What's better than a single LED? Lots of LEDs! Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a ma...

SKU: AF-1784 | Brand: Adafruit

Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead, a metal rod is wrapped with the voice coil. When c...

SKU: SF-PRT-09922 | Brand: SparkFun

A six-wire cable assembly with a 6-pin Molex connector (0.1″ spacing) on one end and bare wires on the other. Includes the mating connector, making it easy to create board-to-board connections or custom wiring harness...

SKU: SF-PRT-09918 | Brand: SparkFun

A two-wire jumper cable with a 2-pin Molex connector (2.54 mm / 0.1" spacing) on one end and bare wire on the other. Includes the mating connector for the Molex header. Useful for board-to-board connections and genera...

SKU: AF-777 | Brand: Adafruit

Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add...

SKU: AF-811 | Brand: Adafruit

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...

SKU: TB-PS0406 | Brand: Little Bird

4mm Panel Mount Sockets to suit Banana plugs. Specifications Plug or Socket Type Banana 4mm (standard) Pack Quantity ...

SKU: DF-FIT0514 | Brand: DFRobot

These wire offers you the best way to connect sensors and actuators to your LattePanda! They are specially designed for LattePanda and DFRobot Gravity Sensors. It compatible with a wide range of Gravity sensors and...

SKU: AF-902 | Brand: Adafruit

The Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack combines a 1.2" 8×8 bicolour (red/green) LED matrix with an HT16K33 I2C driver backpack. Control all 128 LEDs with just two I2C wires — the driver chip ha...

SKU: AF-5236 | Brand: Adafruit

A rugged chrome-plated metal pushbutton with a built-in full-colour NeoPixel LED ring. Simply drill a 19 mm hole in any panel up to 0.45″ thick, fit the button, and seal it with the included rubber gasket for water re...

SKU: AF-5632 | Brand: Adafruit

This breakout makes it much easier to prototype with external QSPI flash on modern microcontroller platforms such as RP2040, ESP32, RT10xx and STM32 designs. It converts a wide 8-SOIC flash package into a breadboard-f...