Components

SKU: SF-ROB-19222 | Brand: SparkFun

Do you have some liquids that you need to move? This fluid pump will move 500 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V, 1.5Amp motor and a tough thermoplastic body. This bilge pumps offer wate...

SKU: AF-5354 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: DF-FIT0865 | Brand: DFRobot

A set of five solderless LED strip pigtail cables, each with a snap-down connector on one end for 10 mm wide 3-wire LED strips and a DuPont-style female connector on the other. The 20 cm colour-labelled wires with mar...

SKU: AF-5011 | Brand: Adafruit

A 10-pack of red DSA profile keycaps for Cherry MX and compatible mechanical key switches. DSA keycaps are fully symmetric in all four directions and have a flat, uniform profile — making them ideal for macro pads, cu...

SKU: AF-5006 | Brand: Adafruit

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of light blue DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'e...

SKU: AF-5192 | Brand: Adafruit

Show off your social-coding flair with a super-classy, custom-made and officially licensed Octocat Etched Keycap featuring the GitHub logo.It's made with a translucent/opaque plastic that is etched to create an elegan...

SKU: AF-5016 | Brand: Adafruit

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of dark blue DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em ...

SKU: AF-5159 | Brand: Adafruit

The Adafruit TCA4307 Hot-Swap I2C Buffer protects your main I2C bus from glitches caused by hot-plugging STEMMA QT / Qwiic peripherals. I2C wasn't designed for hot-swapping, and plugging or unplugging at the wrong mom...

SKU: SF-CAB-18079 | Brand: SparkFun

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is ty...

SKU: SF-CAB-18080 | Brand: SparkFun

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a s...

SKU: SF-COM-18076 | Brand: SparkFun

The GD25Q40C is a 4 Mbit (512 KB) serial flash memory chip supporting standard, dual, and quad SPI interfaces. With clock speeds up to 120 MHz and quad I/O transfer rates reaching 480 Mbits/s, it provides fast non-vol...

SKU: AF-4907 | Brand: Adafruit

A pack of 10 USB-C jack connectors designed for power-only applications. These sturdy metal connectors feature four through-hole mounting tabs that make them extremely difficult to rip off a PCB. They also work in SMT...

SKU: DF-FIT0727 | Brand: DFRobot

Waterproof is always a critical point for outdoor projects, and when you need to drill holes on a project enclosure to lead out the wires, it will be very likely to cause the waterproof problem. Now no more worries, w...

SKU: AF-4763 | Brand: Adafruit

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order...

SKU: SF-BOB-16842 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of ...

SKU: EC-CDE20032P | Brand: Elecrow

An Arduino Uno shield that makes it easy to drive a 16×32 RGB LED matrix panel with a HUB75 connector. Instead of wiring up 12 individual jumper wires, this shield provides a matching 2×8 IDC connector for a clean, re...

SKU: SF-PRT-16581 | Brand: SparkFun

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36...

SKU: SF-COM-16305 | Brand: SparkFun

Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle o...

SKU: EF-EF04017 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: AF-4294 | Brand: Adafruit

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 1.0KΩ Resistors. More specifically, they are carbon film, through-hole ax...