Components

SKU: EF-EF04013 | Brand: ElecFreaks

The Octopus Crash Sensor Brick is a simple collision detection module based on a momentary crash switch. When physical contact is made, the switch triggers a digital signal — making it ideal for bump detection in robo...

SKU: SF-PRT-14765 | Brand: SparkFun

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...

SKU: AF-2782 | Brand: Adafruit

A pack of 25 through-hole 2.2 kΩ carbon film resistors. These standard axial-type resistors feature 0.4 mm leads that plug cleanly into solderless breadboards, making them perfect for prototyping, kits, and permanent ...

SKU: AF-2868 | Brand: Adafruit

A stick of 8 individually addressable RGBW NeoPixel LEDs (Natural White, ~4500 K). Each 5050-size LED contains four elements — red, green, blue, and a dedicated white LED with yellow phosphor — delivering rich colours...

SKU: AF-2858 | Brand: Adafruit

Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Warm White RGBW version. We also ...

SKU: AF-1116 | Brand: Adafruit

Board edge mounting standoffs designed to grip standard 1.6 mm (0.062") thick PCBs by the edge or corner — no mounting holes required. An elegant solution for securing boards like the original Raspberry Pi or any PCB ...

SKU: AF-1230 | Brand: Adafruit

Beguiled by a fancy new chip, regulator or transistor that is only available in a SOT23-3, SOT23-5, SOT23-6, SOT-223, SOT-89, or TO-252 pinout? This set of breakout PCBs will make your life much much easier and get...

SKU: SF-COM-15111 | Brand: SparkFun

USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This is a 16-pin, female, USB Type C connector that is commonl...

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: AF-481 | Brand: Adafruit

This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of y...

SKU: AF-1479 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger ...

SKU: AF-1505 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in black. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. ...

SKU: AF-1661 | Brand: Adafruit

uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great! Chances a...

SKU: AF-1430 | Brand: Adafruit

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using j...

SKU: AF-1794 | Brand: Adafruit

When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...

SKU: AF-2157 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beaut...

SKU: AF-2153 | Brand: Adafruit

Add clear, bright alphanumeric readouts to your next project with this pair of white 14-segment LED displays. Each 0.54" digit can show any letter, number, or symbol — perfect for building clocks, scoreboards, custom ...

SKU: AF-2104 | Brand: Adafruit

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles...

SKU: AF-2237 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (30 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...

SKU: DF-FIT0108 | Brand: DFRobot

A solder-tail DB9 male connector for serial communication interfaces including RS-232, RS-422, and RS-485. This is one of the most widely used connectors for serial data links in industrial, embedded, and legacy compu...