Components
Shop electronic components for your next project — from resistors, capacitors and transistors to LEDs, ICs, switches, connectors and more. Whether you're building a circuit from scratch or repairing existing gear, you'll find the discrete parts you need.
Perfect for hobbyists, students, educators and professional engineers across Australia. Stock up on essentials for prototyping, STEM learning kits or production runs, with fast Australian shipping.
JST PH 2-Pin Cable – Male Header 200mm
SKU: AF-3814 | Brand: Adafruit
For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST...
Delivered by Tue 23 Jun
Rotary Potentiometer - 10k Ohm, Linear
SKU: SF-COM-09939 | Brand: SparkFun
An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...
Delivered by Tue 23 Jun
Resistor Kit - 1/4W (500 total)
SKU: SF-COM-10969 | Brand: SparkFun
Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...
Delivered by Tue 23 Jun
Jumper Wires - Connected 6 (M/M, 20 pack)
SKU: SF-PRT-12795 | Brand: SparkFun
These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...
Delivered by Tue 23 Jun
SPDT Slide Switch
SKU: SF-COM-09609 | Brand: SparkFun
This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...
Delivered by Tue 23 Jun
Resistor 330 Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
SKU: SF-PRT-14490 | Brand: SparkFun
Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...
Delivered by Tue 23 Jun
Big Dome Pushbutton - Red
SKU: SF-COM-09181 | Brand: SparkFun
It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...
Delivered by Tue 23 Jun
Brass Heat-Set Inserts for Plastic - M3 x 4mm - 50 pack
SKU: AF-4255 | Brand: Adafruit
Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a...
Delivered by Tue 23 Jun
Massive Arcade Button with LED - 100mm Red
SKU: AF-1185 | Brand: Adafruit
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, how...
Delivered by Tue 23 Jun
Arduino Stackable Header Kit
SKU: SF-PRT-10007 | Brand: SparkFun
A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...
Delivered by Tue 23 Jun
Teensy Header Kit
SKU: SF-PRT-13925 | Brand: SparkFun
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield boa...
Delivered by Tue 23 Jun
JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long
SKU: AF-4210 | Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...
Delivered by Tue 23 Jun
Battery Holder 2xAA with Cover and Switch
SKU: SF-PRT-09547 | Brand: SparkFun
A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...
Delivered by Tue 23 Jun
Breadboard trim potentiometer [10K]
SKU: AF-356 | Brand: Adafruit
These are our favorite trim pots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing, they plug into breadboards or perfboards with ease. This is the same pot t...
Delivered by Tue 23 Jun
Thin Speaker - 4 Ohm, 2.5W, 28mm
SKU: SF-COM-21311 | Brand: SparkFun
A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable ...
Delivered by Tue 23 Jun
Amphibious Horizontal Submersible Pump
SKU: DF-FIT0800 | Brand: DFRobot
A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and eas...
Delivered by Tue 23 Jun
Massive Arcade Button with LED - 100mm Yellow
SKU: AF-1186 | Brand: Adafruit
OMG WATCH OUT! This 100mm diameter arcade button with a 16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howev...
Delivered by Tue 23 Jun
Breadboard - Mini Modular (Red)
SKU: SF-PRT-12044 | Brand: SparkFun
This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumpe...
Delivered by Tue 23 Jun
SparkFun Logic Level Converter - Bi-Directional
SKU: SF-BOB-12009 | Brand: SparkFun
The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...
Delivered by Tue 23 Jun
Arduino and Breadboard Holder
SKU: SF-DEV-11235 | Brand: SparkFun
The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mountin...
Delivered by Tue 23 Jun
