Circuitry Accessories

SKU: SF-PRT-18769 | Brand: SparkFun

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...

SKU: LB-LR0093 | Brand: Little Bird

Description:The ProtoShield is prototype expansion board with 2 LEDs and 2 button, which can be used directly and more convenience. All the pins and power have been lead out. It is very suitable for building prototype...

SKU: AF-1148 | Brand: Adafruit

The Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit combines a prototyping board with a built-in Pi Cobbler breakout. Solder the included 2×13 box header onto the board, connect a 26-pin GPIO ribbon cab...

SKU: PR-PIM086 | Brand: Little Bird

A laser-cut acrylic base plate that replaces the bottom layer of a Pibow case, adding a secure mounting area for breadboard prototyping alongside your Raspberry Pi. Compatible with Raspberry Pi 3, A+, Zero, and Zero W...

SKU: PI-COM1304 | Brand: Pimoroni

A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of c...

SKU: AF-1518 | Brand: Adafruit

The Adafruit Flex Perma-Proto is a half-sized breadboard-layout prototyping board made from ultra-thin polyamide film. It bends, twists, and can even be cut to shape with scissors — perfect for wearables, curved enclo...

SKU: DF-FIT0141 | Brand: DFRobot

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...

SKU: SF-PRT-14299 | Brand: SparkFun

This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly...

SKU: SF-PRT-14219 | Brand: SparkFun

A 2×AAA battery holder with a sliding cover and built-in ON/OFF switch. The cover keeps batteries secure, and the switch provides convenient power control for your project. Wire leads are approximately 150 mm long wit...

SKU: PL-1914 | Brand: Pololu

These 2×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable twelve-wire c...

SKU: PL-1910 | Brand: Pololu

These 2×2-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable...

SKU: SF-PRT-09835 | Brand: SparkFun

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a numbe...

SKU: AF-824 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male he...

SKU: AF-1949 | Brand: Adafruit

These Female/Female Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainb...

SKU: AF-825 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1...

SKU: AF-2018 | Brand: Adafruit

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x8 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to...

SKU: AF-4375 | Brand: Adafruit

A simple I2C temperature sensor in a breadboard-friendly TO-220 package. The TC74A0 provides basic temperature readings with ±2°C accuracy — a straightforward choice when you need easy temperature logging or monitorin...

SKU: AF-4482 | Brand: Adafruit

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...

SKU: TB-TH1827 | Brand: Little Bird

Designed for easy wire stripping. The alloy steel can strip all types of cable from AWG 10-24 gauge (0.13 -6.0mm), and the wire guide ensures the correct length is stripped time and time again. It incorporates a pre...

SKU: PL-2706 | Brand: Pololu

This single-row, 6-pin right-angle female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. The right-angle orientation routes connections parallel to the board surface, making it id...