Buttons & Switches

SKU: AF-558 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep wat...

SKU: AF-559 | Brand: Adafruit

A chrome-plated metal pushbutton with an illuminated red LED ring, designed for panel mounting in a 16 mm hole. The weatherproof design includes a rubber gasket to seal the enclosure against water ingress, making it s...

SKU: AF-482 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water ou...

SKU: AF-3938 | Brand: Adafruit

The NeoTrellis M4 Mainboard combines an ATSAMD51 Cortex M4 processor, a 4×8 grid of NeoPixel-lit elastomer button pads, stereo audio output, microphone input, and a triple-axis accelerometer into one compact, programm...

SKU: AF-1611 | Brand: Adafruit

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, provid...

SKU: AF-1867 | Brand: Adafruit

A breakout board with a CR1220 coin cell battery holder, an on/off switch, and 0.1″ pitch breakout pins. Ideal for powering very low-current projects or providing switchable battery backup for a real-time clock (RTC) ...

SKU: DF-FIT0115-B | Brand: DFRobot

A rugged, waterproof illuminated pushbutton designed for panel-mount applications. Built from stainless steel, this momentary switch features a blue LED ring that provides clear visual feedback, making it easy to iden...

SKU: DF-FIT0115-G | Brand: DFRobot

A waterproof stainless steel momentary pushbutton with a built-in green LED ring illuminator. Rated IP67 for dust-tight and water-resistant operation, this rugged button is ideal for panel-mount applications in both i...

SKU: DF-FIT0115-R | Brand: DFRobot

This is a water proof push button with illuminator (LED). It is made by stainless steel with excellent quality. It comes at red illuminated ring. SPECIFICATIONS Model:LAS1-AGQ 19 Diameter ...

SKU: AF-2808 | Brand: Adafruit

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose yo...

SKU: AF-1684 | Brand: Adafruit

Push once to turn one side on, push again to turn off, push again to turn the other side on, one last push and its off again! It's basically a push-button toggle switch that connects and disconnects the middle pin fro...

SKU: SF-COM-11973 | Brand: SparkFun

This heavy-duty 16 mm metal pushbutton features a latching (on/off) mechanism with an illuminated green LED ring. Built from stainless steel with an IP65 weatherproof rating, it is designed for panel-mount application...

SKU: SF-COM-11969 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated yellow LED ring. It is a SPDT with 16mm threa...

SKU: SF-COM-11705 | Brand: SparkFun

We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable, but the whole point of using the barrel jacks was s...

SKU: AF-173 | Brand: Adafruit

The "poor man's" accelerometer! Tilt sensors are switches that can detect basic motion/orientation. The metal tube has a little metal ball that rolls around in it, when its tilted upright, the ball rolls onto the cont...

SKU: AF-3102 | Brand: Adafruit

A compact analogue joystick with two 10kΩ potentiometers and a spring-return mechanism. Unlike arcade-style joysticks that use clicking switches, this joystick provides smooth, proportional analogue output across a fu...

SKU: AF-2925 | Brand: Adafruit

When you need a lot of options, you need a Mini 8-Way Rotary Selector Switch. This is basically a single-pole to 8-throw switch. As you rotate the knob around, the middle pin will make contact with each of the oute...

SKU: AF-423 | Brand: Adafruit

Your friends probably tell you that you are "good with your hands," but now you can also be good with your feet! This foot switch is made of rubbery plastic, is plenty strong to put up with any amount of stomping, and...

SKU: AF-475 | Brand: Adafruit

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no ...

SKU: AF-512 | Brand: Adafruit

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, pro...