Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
SparkFun GPS Breakout - Chip Antenna, SAM-M10Q (Qwiic)
SKU: SF-GPS-21834 | Brand: SparkFun
The SparkFun SAM-M10Q GPS Breakout features the SAM-M10Q chip-antenna module from u-blox©. The M10Q line is the successor to u-blox's M8Q found on the SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic), and is a dr...
Out of stock
SparkFun Buck Regulator Breakout - 1.8V (AP3429A)
SKU: SF-COM-21338 | Brand: SparkFun
The SparkFun 1.8V Buck Regulator Breakout features the AP3429A step-down DC-DC converter, providing a regulated 1.8V output at up to 2A continuous current from a 2.7V to 5.5V input. An enable pin allows the output to ...
Out of stock
SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic)
SKU: SF-GPS-18037 | Brand: SparkFun
The SparkFun MAX-M10S Breakout is an ultra-low-power, high performance, miniaturized GNSS board that is perfect for battery operated applications that don't possess a lot of space, such as asset trackers and wearable ...
Out of stock
SparkFun Micro Pressure Sensor - BMP581 (Qwiic)
SKU: SF-SEN-20171 | Brand: SparkFun
The SparkFun Qwiic BMP581 Pressure Sensor is a micro-sized, absolute pressure sensor breakout from Bosch Sensortec. The BMP581 boasts exceptional resolution and accuracy (down to 1/64Pa) and uses on-chip linearization...
Out of stock
SparkFun MicroMod Single Pair Ethernet Function Board - ADIN1110
SKU: SF-COM-19038 | Brand: SparkFun
The SparkFun MicroMod Single Pair Ethernet Function Board brings 10BASE-T1L two-wire Ethernet to the MicroMod ecosystem using the Analog Devices ADIN1110 transceiver. It enables long-range, 10Mbps full-duplex Ethernet...
Out of stock
SparkFun GNSS Timing Breakout - ZED-F9T (Qwiic)
SKU: SF-GPS-18774 | Brand: SparkFun
The SparkFun GNSS Timing Breakout offers a unique entry into SparkFun's geospatial catalog featuring the ZED-F9T GNSS receiver from u-blox. The ZED-F9T provides up to five nanosecond timing accuracy under clear skies ...
Out of stock
RJ-45 Terminal Block to Ethernet Socket Adapter
SKU: AF-4981 | Brand: Adafruit
If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet socket - this adapter will come in very handy! This is an Ethernet (RJ-45) Terminal Block to Socket Adapter.&nb...
Out of stock
Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
SKU: DF-SEN0443 | Brand: DFRobot
The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and on-chip 16-bit ADCs. With up to ±1% initial sensitivity and low noise(6...
Out of stock
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board
SKU: AF-4535 | Brand: Adafruit
The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...
Out of stock
SparkFun Air Velocity Sensor Breakout - FS3000-1005 (Qwiic)
SKU: SF-SEN-18377 | Brand: SparkFun
Need to keep track of the airflow in your data center or around your servers? How about making sure your HVAC and air control systems are functioning at full capacity? Well, the new SparkFun FS3000-1005 Air Velocity S...
Out of stock
SparkFun Qwiic ToF Imager - VL53L5CX
SKU: SF-SEN-18642 | Brand: SparkFun
The SparkFun Qwiic ToF Imager is a state of the art, 64 pixel Time-of-Flight (ToF) 4 meter ranging sensor built around the VL53L5CX from ST. This chip integrates a SPAD array, physical infrared filters, and diffractiv...
Out of stock
Little Bird Breakout Nest for Raspberry Pi
SKU: LB-NEST-PI | Brand: Little Bird
The Breakout Nest is a Raspberry Pi breakout board, designed for quick and easy connection to external circuitry. This Raspberry Pi GPIO Breakout board gives you easy access to all GPIO pins and I2C interface. Our bre...
Out of stock
Pico Wireless Pack
SKU: PR-PIM548 | Brand: Little Bird
Add 2.4 GHz Wi-Fi connectivity and local storage to your Raspberry Pi Pico with this compact add-on pack. The Pico Wireless Pack attaches to the back of your Pico using pre-soldered female headers — no soldering requi...
Out of stock
W5500 Ethernet Module
SKU: EC-CIA55000W | Brand: Elecrow
This NIREN W5500 is a Ethernet module that basic on the new type chip W5500, The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI ...
Out of stock
Raspberry Pi Compute Module 4 IO Board
SKU: RP-SC0326 | Brand: Raspberry Pi
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4. It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.The ...
Out of stock
SparkFun MicroMod ATP Carrier Board
SKU: SF-DEV-16885 | Brand: SparkFun
The SparkFun MicroMod ATP (All The Pins) Carrier Board breaks out every pin from the MicroMod M.2 connector to 0.1" female headers and PTH pads, giving you full access to your MicroMod Processor Board's capabilities. ...
Out of stock
Adafruit SHARP Memory Display Breakout - 2.7 400x240 Monochrome
SKU: AF-4694 | Brand: Adafruit
The Adafruit SHARP Memory Display Breakout features a 2.7" 400×240 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The larger display area and ...
Out of stock
CJMCU FT232H High Speed Multifunctional USB to JTAG UART/FIFO SPI/I2C Module For Arduino
SKU: EC-ARP02016U | Brand: Elecrow
The CJMCU FT232H module is a versatile USB-to-serial/parallel interface breakout based on the FTDI FT232H chip. It supports USB conversion to UART, FIFO, JTAG, SPI, and I2C interfaces, with the entire USB protocol han...
Out of stock
Yahboom Gamepad Joystick Breakout Board for BBC Micro:bit
SKU: YH-6000100071 | Brand: Little Bird
The Yahboom Gamepad is a game controller expansion board for the BBC micro:bit, featuring a joystick, four control buttons, programmable RGB LEDs, a buzzer, and multiple sensor interfaces. It doubles as both a standal...
Out of stock
SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)
SKU: AF-4515 | Brand: Adafruit
The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with Feather/Thing Plus Footprint. It connects the I2C bu...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
