Breakouts

SKU: AF-5634 | Brand: Adafruit

This breakout makes it easier to prototype with external QSPI flash memory, as used by many modern microcontrollers such as RP2040, ESP32, RT10xx and STM32 series devices. It carries a W25Q128JVSSIQ flash chip, giving...

SKU: AF-6051 | Brand: Adafruit

Add magnetic sensing to your project with this breakout built around the Texas Instruments DRV5032 digital Hall effect sensor. Its digital output changes when the magnetic flux density threshold is crossed, making it ...

SKU: LB-LS3507 | Brand: Little Bird

This 2×20 pin tall female header extends the reach of any board with a standard 40-pin GPIO layout, including the Raspberry Pi, Google Coral, and NVIDIA Jetson. At 16 mm tall with standard 0.1″ (2.54 mm) spacing, it p...

SKU: EC-WRW24015R | Brand: Elecrow

A long-range 2.4 GHz wireless transceiver module based on the NRF24L01+ chip with an integrated power amplifier (PA) and low-noise amplifier (LNA). The added PA and LNA significantly extend the effective communication...

SKU: EC-SMI3231DS | Brand: Elecrow

DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it...

SKU: EC-SMI00101S | Brand: Elecrow

This tiny RTC module is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date,month, and year informati...

SKU: PI-PIM722 | Brand: Pimoroni

The PGA2350 is a minimal but powerful RP2350B breakout board in a Pin Grid Array format, cramming the maximum number of exposed pins into the smallest possible space. At just 25.4 × 25.4 mm, it's designed to be embedd...

SKU: AF-2226 | Brand: Adafruit

Be the belle of the ball with the NeoPixel Jewel!  We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a chainable design to create what we think...

SKU: PR-PIM374 | Brand: Little Bird

This crisp 1.12″ monochrome OLED breakout features a 128×128 pixel white-on-black display, ideal for adding graphing, readouts, and basic icons to your project. OLEDs deliver excellent contrast and brightness, and thi...

SKU: SF-BOB-18012 | Brand: SparkFun

Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus. O...

SKU: EC-MCS01005S | Brand: Elecrow

This Arduino Nano IO Shield can easy support Nano and Pro. Because the Arduino Nano and Pro is too small to connect to jumper wires or breadboard. So this Nano IO Shield is born. The shield has lead out all IOs of ...

SKU: FT-PIBR | Brand: Freetronics

The PiBreak from Freetronics is a prototyping board for the Raspberry Pi, providing labelled breakout pins for all GPIOs, a large solder-pad prototyping area, and GND and 3.3 V power rails for easy connections. Compa...

SKU: TS-G53F55213D1CF0 | Brand: Little Bird

This a Raspberry Pi Model B+ prototyping shield from Tinysine, You can stack it on your Raspberry Pi Model B+ easily. which can snap onto the Pi B+ main board assembly (and is removable later if you wish) an...

SKU: SF-BOB-11570 | Brand: SparkFun

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connect...

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: PR-PIM320 | Brand: Little Bird

A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHAT...

SKU: DF-DFR0107 | Brand: DFRobot

This IR kit provides a remote control capability to your project. DOCUMENTS   Wiki Arduino Library (Compatible with Leonardo) SHIPPING LIST   IR Remote Controller (With battery CR2025 inside) x1...

SKU: AF-4698 | Brand: Adafruit

The Adafruit AS7341 is a 10-channel multi-spectral light sensor that detects not just the amount of light present, but the specific wavelengths — giving you far more detailed colour information than a simple RGB senso...

SKU: LB-LR0044-WH | Brand: Little Bird

A 6-axis motion tracking breakout module based on the InvenSense MPU-6050, combining a 3-axis MEMS gyroscope and a 3-axis MEMS accelerometer on a single chip. With 16-bit ADC hardware for each channel capturing all ax...

SKU: PR-PIM366 | Brand: Little Bird

A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino.It...