Breakouts

SKU: SF-SEN-20659 | Brand: SparkFun

Add 3-axis motion sensing to your project with this LIS3DH accelerometer breakout from SparkFun. The LIS3DH is a low-power, capacitive micro-machined accelerometer with 12 bits of resolution, suitable for detecting tr...

SKU: SF-SEN-30381 | Brand: SparkFun

This breakout pairs the Feyman (FMI) IM19 9DoF IMU with a board layout made for high-accuracy PNT and RTK GNSS projects. It combines MEMS sensor data with external GNSS RTK positioning information to provide precise a...

SKU: AF-6411 | Brand: Adafruit

Bosch’s BMP580 is a precision barometric pressure, temperature and altimeter sensor for projects that need fine height or pressure tracking. It follows on from Bosch’s BMP2xx and BMP3xx sensors and can be used over ei...

SKU: AF-6407 | Brand: Adafruit

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer...

SKU: AF-6357 | Brand: Adafruit

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for fric...

SKU: AF-6461 | Brand: Adafruit

This compact breakout combines RGB colour sensing, true lux light measurement and infrared proximity detection in one I2C device. With library code running on your microcontroller, it can read red, green, blue and cle...

SKU: AF-5830 | Brand: Adafruit

This compact Adafruit breakout helps manage two power inputs in a small project, such as a battery, USB supply or DC wall adaptor. It uses the LM66200 dual ideal diode IC to select the higher of two inputs while helpi...

SKU: AF-6318 | Brand: Adafruit

This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, indu...

SKU: AF-4503 | Brand: Adafruit

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3...

SKU: AF-6495 | Brand: Adafruit

This BFF add-on makes it much easier to wire up small QT Py and Xiao projects without juggling loose jumpers. Plug in a compatible board and each pin is brought out to a screw-terminal block, with an extra socket pin ...

SKU: AF-6455 | Brand: Adafruit

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...

SKU: SF-GPS-28871 | Brand: SparkFun

This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...

SKU: SF-GPS-28962 | Brand: SparkFun

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...

SKU: SF-GPS-29208 | Brand: SparkFun

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...

SKU: SF-SEN-24409 | Brand: SparkFun

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...

SKU: SF-SEN-29468 | Brand: SparkFun

This Red Vision breakout brings the Himax HM01B0 colour camera module out to maker-friendly connections for robotics, embedded vision and camera experiments. The module provides a 320 x 320 pixel array with I2C contro...

SKU: DF-DFR1229 | Brand: DFRobot

This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applica...

SKU: DF-DFR1230 | Brand: DFRobot

This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-...

SKU: DF-SEN0665 | Brand: DFRobot

This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude ...

SKU: AF-6309 | Brand: Adafruit

Add high-quality amplified I2S digital audio to your project with this TLV320DAC3100 breakout. It provides clean stereo audio for 16Ω headphones and/or mono speaker output for a 4Ω-8Ω speaker, making it handy for comp...