Breakouts

SKU: AF-1895 | Brand: Adafruit

The Adafruit I2C Non-Volatile FRAM Breakout provides 256 Kbit (32 KByte) of fast, non-volatile storage for your microcontroller projects. FRAM (Ferroelectric RAM) combines the speed of SRAM with the persistence of EEP...

SKU: SF-BOB-12708 | Brand: SparkFun

This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and includes a s...

SKU: AF-1899 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: AF-1824 | Brand: Adafruit

This phone-style 3×4 matrix keypad features 12 buttons (0–9, *, #) with telephone-layout lettering printed on the keys. It uses a matrix scanning arrangement requiring only 7 microcontroller pins (3 columns + 4 rows) ...

SKU: SF-COM-10079 | Brand: SparkFun

RTC stands for real time clock folks. The DS3234 is a low-cost, extremely accurate SPI bus RTC with an integrated temperature compensated crystal oscillator (TCXO) and crystal.

SKU: SF-BOB-09966 | Brand: SparkFun

A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregu...

SKU: SF-BOB-09816 | Brand: SparkFun

This is a simple 5V Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandw...

SKU: AF-2019 | Brand: Adafruit

The Adafruit MMA8451 is a high-precision triple-axis accelerometer with a built-in 14-bit ADC, offering selectable measurement ranges of ±2g, ±4g, and ±8g. Designed by Freescale (now NXP), this sensor detects motion, ...

SKU: SF-WIG-09555 | Brand: SparkFun

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a fo...

SKU: DF-DFR0072 | Brand: DFRobot

At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers.  With this shift out module which is based on 74HC595. The datasheet refers to the 74HC595 as an "8...

SKU: AF-2088 | Brand: Adafruit

The Adafruit 1.44" Colour TFT LCD Display Breakout is a compact 128×128 pixel screen driven by the ST7735R controller over 4-wire SPI. Unlike older CSTN displays, this is a true TFT with full 16-bit colour and fast re...

SKU: AF-3502 | Brand: Adafruit

The Adafruit SHARP Memory Display Breakout features a 1.3" 168×144 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The display shows crisp blac...

SKU: AF-2090 | Brand: Adafruit

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delive...

SKU: AF-3538 | Brand: Adafruit

Add heat-vision to your project with the Adafruit AMG8833 Grid-EYE Breakout. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like...

SKU: AF-902 | Brand: Adafruit

The Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack combines a 1.2" 8×8 bicolour (red/green) LED matrix with an HT16K33 I2C driver backpack. Control all 128 LEDs with just two I2C wires — the driver chip ha...

SKU: AF-904 | Brand: Adafruit

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC...

SKU: SF-SEN-21336 | Brand: SparkFun

The SparkFun Micro 6DoF IMU Breakout features the STMicroelectronics LSM6DSV16X — a high-performance, low-power 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope. Its triple-core architecture processes data ...

SKU: AF-2219 | Brand: Adafruit

It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding HDMI/DVI video for some other project. This breakout features the TFP...

SKU: WS-26117 | Brand: Waveshare

This compact 0.85-inch IPS LCD display module gives you a small full-colour screen for embedded interfaces, status readouts and other maker projects. It uses an SPI interface, making it a practical match for microcont...

SKU: AF-5836 | Brand: Adafruit

This breakout adds eight analogue input channels over I2C, making it a handy way to read potentiometers, LDRs, flex sensors and other analogue or resistive sensors from boards that need more ADC inputs. It’s especiall...