Breakouts

SKU: AF-1032 | Brand: Adafruit

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object...

SKU: AF-2105 | Brand: Adafruit

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket stra...

SKU: DF-DFR0013 | Brand: DFRobot

The DFRobot IIC to GPIO Shield V2.0 (DFR0013) expands your Arduino's digital I/O capacity by converting a single I2C bus into 16 additional digital I/O ports. Using just two data lines (SCL and SDA), the shield frees ...

SKU: AF-2479 | Brand: Adafruit

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...

SKU: AF-2542 | Brand: Adafruit

The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GP...

SKU: DF-DFR0117 | Brand: DFRobot

Arduino has a small amount of data storage space, The Arduino UNO has 32k. It doesn't have enough space if you want to store a lot of data. Therefore, we need to add an EEPROM Data Storage Module to increase its stora...

SKU: AF-2633 | Brand: Adafruit

The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...

SKU: PL-2481 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...

SKU: AF-2674 | Brand: Adafruit

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...

SKU: AF-2675 | Brand: Adafruit

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...

SKU: SF-BOB-09322 | Brand: SparkFun

A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connections for PWR, GND, and Signal.When the gate is clear, SIG will be high (>...

SKU: AF-2884 | Brand: Adafruit

The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad str...

SKU: SF-PRT-08811 | Brand: SparkFun

A 2" (50 mm) square double-sided perfboard with standard 0.1" (2.54 mm) hole spacing. Features 4-40 (3 mm) mounting holes in the corners for easy installation in enclosures or stacking multiple boards. Specifications...

SKU: SF-PRT-08780 | Brand: SparkFun

A compact RS232-to-TTL level shifter board that converts both TX and RX lines bidirectionally. Powered from your target application's supply voltage, it automatically converts RS232 signals to match — run it at 5 V fo...

SKU: DF-FIT0291 | Brand: DFRobot

This is a SOP8/SOP16/SOP28 to DIP16/DIP28 Adapter Board.You can change the SOP8/SOP16/SOP28 to DIP16/DIP28 packaging. So that You needn't to buy the DIP chips for prototyping specially.Just solder the SMD chips on ...

SKU: SF-DEV-14050 | Brand: SparkFun

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for a...

SKU: SF-PRT-08619 | Brand: SparkFun

An empty canvas for electrical enthusiasts! Designed to fit the SFE project enclosures this project board gives you 8x10cm (3.15x3.94") of building space for through-hole components with 2.54mm (100mil) spaced hole...

SKU: SF-COM-08348 | Brand: SparkFun

The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...

SKU: SF-SEN-12041 | Brand: SparkFun

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use d...

SKU: SF-SEN-12040 | Brand: SparkFun

The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a sm...