Breakouts

SKU: AF-992 | Brand: Adafruit

This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has u...

SKU: AF-1018 | Brand: Adafruit

A wide-range triple-axis accelerometer breakout featuring the Analog Devices ADXL326. With a ±16 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for detecting high-impact motion, vibr...

SKU: AF-1031 | Brand: Adafruit

This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 8" long 3-JST interface wire...

SKU: AF-4132 | Brand: Adafruit

The Adafruit GPIO Expander Bonnet adds 16 extra digital I/O pins to your Raspberry Pi over I²C. Based on the MCP23017 chip, it plugs directly onto the Pi's 40-pin header and communicates via SDA/SCL, leaving your othe...

SKU: PR-PIM376 | Brand: Little Bird

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rov...

SKU: AF-4022 | Brand: Adafruit

Measure invisible magnetic fields with the Adafruit Wide-Range Triple-axis Magnetometer, featuring the MLX90393 sensor. With 16-bit resolution across all three axes and a dynamic range of ±5 mT to ±50 mT, this sensor ...

SKU: AF-4089 | Brand: Adafruit

Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...

SKU: AF-1163 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 32-pin QFN or TQFP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 32-pin QFP footprint while the other support...

SKU: SF-DEV-15162 | Brand: SparkFun

The SparkFun gator:bit v2.0 is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads t...

SKU: AF-1199 | Brand: Adafruit

A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin he...

SKU: AF-1210 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 14-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 14-pin TSSOP footprint while the other sup...

SKU: AF-1211 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 12-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 12-pin TSSOP footprint while the other sup...

SKU: AF-3779 | Brand: Adafruit

The Adafruit AS7262 is a 6-channel visible light spectral sensor from AMS that measures light intensity across six specific wavelength bands: violet (450 nm), blue (500 nm), green (550 nm), yellow (570 nm), orange (60...

SKU: SF-GPS-15136 | Brand: SparkFun

With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...

SKU: SF-COM-15093 | Brand: SparkFun

Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with...

SKU: AF-1323 | Brand: Adafruit

Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 ...

SKU: AF-1325 | Brand: Adafruit

The Adafruit FPC Stick is a double-sided adapter PCB for connecting to 0.5 mm or 1.0 mm pitch flat flexible cables (FPCs). One side accommodates 0.5 mm pitch connectors, while the other handles 1.0 mm pitch — and it c...

SKU: TB-XC4574 | Brand: Little Bird

The light sensor, also known as the light dependent resistor (LDR). Typically, the resistance of the light sensor will decrease when the ambient light intensity increases.   Linksprite Page   Specificat...

SKU: AF-1362 | Brand: Adafruit

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-...

SKU: AF-1377 | Brand: Adafruit

Beguiled by a fancy new chip that is only available in a QFP or QFN pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 48-QFP pin out with trace...