Breakouts

SKU: AF-5203 | Brand: Adafruit

A simple 20-pin FFC/FPC extender that lets you connect two 20-pin 0.5mm pitch flat cables end-to-end, extending the total cable length. Ideal when the included cable on a display, camera, or sensor module is too short...

SKU: AF-5165 | Brand: Adafruit

The Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement over a simple I2C interface. Connect your thermocouple, wire up I2C (or use the solderless STE...

SKU: AF-4530 | Brand: Adafruit

The Adafruit LPS25 Pressure Sensor Breakout features the ST LPS25HB — an absolute barometric pressure sensor that measures atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation,...

SKU: AF-5206 | Brand: Adafruit

The Adafruit 1.69" Round Rectangle TFT is a compact IPS display featuring 280×240 pixels at 220 PPI with distinctive rounded corners — ideal for smartwatch-style interfaces and modern electronics projects. The ST7789 ...

SKU: AF-5295 | Brand: Adafruit

Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No ...

SKU: AF-5146 | Brand: Adafruit

The Adafruit 24LC32 I2C EEPROM Breakout provides 32 Kbit (4 KB) of reliable, non-volatile storage over a simple I2C interface. Store calibration values, MAC addresses, access tokens, or any data that needs to persist ...

SKU: AF-3573 | Brand: Adafruit

The Adafruit TPL5111 Low Power Timer Breakout turns any electronics project into a low-power system by periodically toggling an enable pin. Connect it to your project's enable line, and the TPL5111 will handle the res...

SKU: AF-5296 | Brand: Adafruit

The Adafruit LED Arcade Button 1×4 QT I2C Breakout lets you connect up to four illuminated arcade buttons to any microcontroller over I2C. A built-in seesaw microcontroller handles button press detection and LED PWM c...

SKU: SF-SEN-18020 | Brand: SparkFun

The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions. Due to the capabilities and low cost of the LSM6DSO...

SKU: SF-SEN-17589 | Brand: SparkFun

This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX134 digital accelerometer from Kionix. The KX134 is a low-power, 16-bit resolution three-axis accelerometer capable of measuring ±...

SKU: SF-DEV-17723 | Brand: SparkFun

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This boa...

SKU: SF-SEN-17372 | Brand: SparkFun

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a simple board equipped with an EKM-series PIR sensor from Panasonic®. T...

SKU: SF-COM-18000 | Brand: SparkFun

The SparkFun QwiicBus MidPoint extends the range of your I2C bus using differential signaling over standard Ethernet cables. Based on the NXP PCA9615 IC, it converts I2C signals (SCL and SDA) into four differential si...

SKU: SF-SEN-17374 | Brand: SparkFun

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K Qwiic PIR uses an EKM-series PIR sensor from Panasonic® paired with an ATTiny84 to inter...

SKU: SF-DEV-17724 | Brand: SparkFun

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This boa...

SKU: SF-SEN-18632 | Brand: SparkFun

The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This Function Board includes three sensors to monitor air quality (SGP40), humidity & temperature (S...

SKU: SF-BOB-16445 | Brand: SparkFun

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C ...

SKU: DF-SEN0429 | Brand: DFRobot

The TMF8701 is a time-of-flight (ToF) distance ranging sensor that uses the time difference between light pulses to measure distance. It provides single zone detection of an object irrespective of the color, reflectiv...

SKU: DF-SEN0430 | Brand: DFRobot

The TMF8801 is a time-of-flight (ToF) distance ranging sensor that uses the time difference between light pulses to measure distance. It provides single zone detection of an object irrespective of the color, reflectiv...

SKU: DF-SEN0441 | Brand: DFRobot

This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. The matching sample code integrates the co...