Breakouts

SKU: SF-BOB-31206 | Brand: SparkFun

Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connecti...

SKU: AF-6411 | Brand: Adafruit

Bosch’s BMP580 is a precision barometric pressure, temperature and altimeter sensor for projects that need fine height or pressure tracking. It follows on from Bosch’s BMP2xx and BMP3xx sensors and can be used over ei...

SKU: AF-6407 | Brand: Adafruit

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer...

SKU: AF-6357 | Brand: Adafruit

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for fric...

SKU: AF-6461 | Brand: Adafruit

This compact breakout combines RGB colour sensing, true lux light measurement and infrared proximity detection in one I2C device. With library code running on your microcontroller, it can read red, green, blue and cle...

SKU: AF-6318 | Brand: Adafruit

This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, indu...

SKU: AF-4503 | Brand: Adafruit

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3...

SKU: AF-6495 | Brand: Adafruit

This BFF add-on makes it much easier to wire up small QT Py and Xiao projects without juggling loose jumpers. Plug in a compatible board and each pin is brought out to a screw-terminal block, with an extra socket pin ...

SKU: AF-6455 | Brand: Adafruit

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...

SKU: SF-GPS-28871 | Brand: SparkFun

This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...

SKU: SF-GPS-28962 | Brand: SparkFun

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...

SKU: SF-GPS-29208 | Brand: SparkFun

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...

SKU: SF-SEN-24409 | Brand: SparkFun

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-GPS-26620 | Brand: SparkFun

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout ...

SKU: SF-WRL-21327 | Brand: SparkFun

This board is a low-power 2.4GHz BT beacon breakout built around the InPlay IN100 NanoBeacon. It is designed for fast deployment in wireless sensor monitoring, asset tracking, retail beaconing and real-time location t...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...

SKU: SF-SEN-27544 | Brand: SparkFun

When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channe...

SKU: SF-GPS-28019 | Brand: SparkFun

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...

SKU: SF-GPS-30018 | Brand: SparkFun

Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free...