Breakouts

SKU: DF-DFR0065 | Brand: DFRobot

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for gene...

SKU: AF-3595 | Brand: Adafruit

The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a single I2C breakout. It uses an integrated IR LED and four dir...

SKU: AF-6174 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...

SKU: AF-5644 | Brand: Adafruit

The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generating the bias voltage needed by OLED displays, LED string back...

SKU: AF-4440 | Brand: Adafruit

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumpti...

SKU: AF-5182 | Brand: Adafruit

The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...

SKU: AF-4832 | Brand: Adafruit

The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH...

SKU: AF-4566 | Brand: Adafruit

The Adafruit AHT20 is an affordable I2C temperature and humidity sensor from the makers of the popular DHT22. It delivers reliable readings with standard I2C communication, making it easy to use with any Arduino, Rasp...

SKU: AF-4493 | Brand: Adafruit

For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching  JST PH 3-Pin to Male Header Cables - 200mm,...

SKU: AF-1028 | Brand: Adafruit

Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.9" breakout board. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power com...

SKU: AF-4161 | Brand: Adafruit

The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all ove...

SKU: SF-PRT-15353 | Brand: SparkFun

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project...

SKU: AF-4197 | Brand: Adafruit

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its i...

SKU: SF-ROB-14450 | Brand: SparkFun

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-bra...

SKU: AF-1164 | Brand: Adafruit

This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: PI-COM1700 | Brand: Pimoroni

The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...

SKU: AF-3709 | Brand: Adafruit

The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated ...

SKU: AF-1770 | Brand: Adafruit

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a resistive touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colou...

SKU: AF-1782 | Brand: Adafruit

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any ...