Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit PCF8523 Real Time Clock Assembled Breakout Board
SKU: AF-3295 | Brand: Adafruit
Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Pe...
Delivered by Wed 16 Sep
Adafruit STEMMA Reflective Photo Interrupt Sensor - TCRT1000
SKU: AF-5913 | Brand: Adafruit
The Adafruit STEMMA Reflective Photo Interrupt Sensor uses a TCRT1000 right-angle optical module to detect reflective surfaces. An onboard IR LED emits light, and when an object reflects it back to the IR phototransis...
Delivered by Wed 16 Sep
Fermion: MEMS Smoke Gas Detection Sensor (Breakout, 10-1000ppm)
SKU: DF-SEN0570 | Brand: DFRobot
Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...
Delivered by Thu 3 Sep
Fermion: MEMS Odor Smell Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0571 | Brand: DFRobot
Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal...
Delivered by Thu 3 Sep
SparkFun USB-C Host Shield
SKU: SF-DEV-21247 | Brand: SparkFun
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...
Delivered by Tue 25 Aug
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5610 | Brand: Adafruit
The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Wed 16 Sep
Gravity: Multifunctional Environmental Sensor
SKU: DF-SEN0501 | Brand: DFRobot
This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmen...
Delivered by Thu 3 Sep
Fermion: SHT30 Digital Temperature & Humidity Sensor (Breakout)
SKU: DF-SEN0330 | Brand: DFRobot
This Digital Temperature & Humidity Sensor Breakout Board is based upon the Sensirion SHT30 sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap t...
Delivered by Thu 3 Sep
Fermion: SHT35 Digital Temperature & Humidity Sensor (Breakout)
SKU: DF-SEN0333 | Brand: DFRobot
A high-accuracy digital temperature and humidity sensor breakout board based on the Sensirion SHT35 sensor IC. Using Sensirion's CMOSens technology, the SHT35 delivers excellent long-term stability, low power consumpt...
Delivered by Thu 3 Sep
Adafruit PCF8523 Real Time Clock Breakout Board
SKU: AF-5189 | Brand: Adafruit
Keep track of time even when your project loses power or gets reprogrammed. This updated PCF8523 Real Time Clock breakout features STEMMA QT / Qwiic connectors for solderless I2C wiring, plus traditional breadboard he...
Delivered by Tue 25 Aug
Adafruit ISO1540 Bidirectional I2C Isolator - STEMMA QT / Qwiic
SKU: AF-4903 | Brand: Adafruit
This compact breakout provides electrical isolation between two sides of an I2C bus, helping separate earth-grounded circuits, reduce noise, or protect sensitive low-voltage monitoring equipment from faults cascading ...
Delivered by Wed 16 Sep
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor - STEMMA QT / Qwiic
SKU: AF-4821 | Brand: Adafruit
The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applicati...
Delivered by Wed 16 Sep
Adafruit SGP40 Air Quality Sensor Breakout - VOC Index - STEMMA QT / Qwiic
SKU: AF-4829 | Brand: Adafruit
The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensiri...
Delivered by Tue 25 Aug
1.54 240x240 IPS TFT LCD Display with MicroSD Card Breakout
SKU: DF-DFR0649 | Brand: DFRobot
A 1.54-inch IPS TFT LCD breakout with 240×240 resolution, 16-bit colour (RGB565), and an onboard microSD card slot for storing and displaying images. The ST7789 driver communicates via SPI or DFRobot's GDI interface f...
Delivered by Thu 3 Sep
Adafruit Sensirion SHTC3 Temperature Humidity Sensor - STEMMA QT / Qwiic
SKU: AF-4636 | Brand: Adafruit
The Adafruit Sensirion SHTC3 is a compact temperature and humidity sensor with a true I2C interface, offering ±2% relative humidity and ±0.2 °C temperature accuracy. It's a cost-effective option from Sensirion's range...
Delivered by Wed 16 Sep
Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic
SKU: AF-4471 | Brand: Adafruit
The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from P...
Delivered by Wed 16 Sep
Adafruit MLX90640 24x32 IR Thermal Camera Breakout - 110 Degree FoV
SKU: AF-4469 | Brand: Adafruit
The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcont...
Delivered by Wed 16 Sep
Adafruit Mini GPS PA1010D - UART and I2C - STEMMA QT
SKU: AF-4415 | Brand: Adafruit
The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chip...
Delivered by Wed 16 Sep
Adafruit LPS35HW Water Resistant Pressure Sensor
SKU: AF-4258 | Brand: Adafruit
The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...
Delivered by Tue 25 Aug
3.2 TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341
SKU: AF-1743 | Brand: Adafruit
A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The b...
Delivered by Tue 25 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
