Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit 1.54" Tri-Color eInk / ePaper 200x200 Display with SRAM
SKU: AF-4868 | Brand: Adafruit
The Adafruit 1.54" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel display with black, red, and white ink, this breakout delivers high-contrast, d...
Out of stock
Arduino Infrared Remote Control IOT Smart IR Module
SKU: EC-WIS00975M | Brand: Elecrow
The Smart IR Module is a compact infrared transceiver board designed for IoT remote control projects. With four IR transmitters arranged for 360° coverage and an integrated IR receiver, it allows you to learn remote c...
Out of stock
Logic Level Converter Module
SKU: FT-LEVEL | Brand: Freetronics
Many of the most interesting sensors and devices are only available in 3.3V or even lower voltage versions, which can be a problem if you want to connect them to a 5V microcontroller such as an Arduino. This module...
Out of stock
OLED Breakout Board - 16-bit Color 1.5 w/microSD holder
SKU: AF-1431 | Brand: Adafruit
A 1.5" colour OLED breakout with 128×128 RGB pixels and 16-bit colour depth, driven by the SSD1351 controller. Because it uses OLED technology, there is no backlight — blacks are truly black with excellent contrast. T...
Out of stock
FTDI Friend + extras [v1.0]
SKU: AF-284 | Brand: Adafruit
Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14 - read more. Long gone are the days of parallel ports and ...
Out of stock
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Out of stock
ROS-Compatible 10-Axis IMU Sensor with ARM DSP, BLE 5.3, and Environmental Sensors
SKU: WS-29207 | Brand: Waveshare
Revolutionize Your Robotics and Drones with the 10-Axis ROS IMU SensorDive into Dynamic Orientation and Precision with Our State-of-the-Art SensorTransform your robotic creations into masterpieces of precision and agi...
Out of stock
Adafruit CP2105 Friend - USB to Dual UART Serial Converters
SKU: AF-6065 | Brand: Adafruit
The Adafruit CP2105 Friend provides two independent UART serial ports from a single USB-C connection — no USB hub required. Built around the Silicon Labs CP2105 dual-port bridge, it enumerates as two separate COM port...
Out of stock
Adafruit ADG729 Dual 1-to-4 Analog Matrix Switch
SKU: AF-5932 | Brand: Adafruit
The Adafruit ADG729 is a solid-state dual 1-to-4 analog matrix switch controlled over I2C. It provides two independent groups of 4 switches — four channels routed to the DA pin and four channels routed to the DB pin —...
Out of stock
Adafruit NeoDriver - I2C to NeoPixel Driver Board - Stemma QT
SKU: AF-5766 | Brand: Adafruit
The Adafruit NeoDriver converts I2C commands into NeoPixel (WS2812/SK6812) timing signals, letting you control addressable LED strips from any board with an I2C bus — even platforms that lack native NeoPixel support. ...
Out of stock
Adafruit Grayscale 1.5 128x128 OLED Graphic Display - STEMMA QT / Qwiic
SKU: AF-4741 | Brand: Adafruit
The Adafruit Grayscale 1.5" OLED Display delivers 128×128 pixels with 16 levels of grayscale on a crisp, high-contrast OLED panel. Driven by the SSD1327 controller, it connects via I²C or SPI and includes STEMMA QT / ...
Out of stock
Adafruit 1.54 Monochrome eInk / ePaper Display with SRAM - 200x200 Monochrome
SKU: AF-4196 | Brand: Adafruit
The Adafruit 1.54" Monochrome eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel black-and-white display, this breakout delivers high-contrast, daylight-readabl...
Out of stock
Adafruit 2.7 Tri-Color eInk / ePaper Display with SRAM - Red Black White
SKU: AF-4098 | Brand: Adafruit
Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.7" breakout board. The panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power com...
Out of stock
Display-O-Tron Breakout
SKU: PR-PIM146 | Brand: Little Bird
The Display-O-Tron Breakout pairs a high-contrast 16 × 3 character LCD with an RGB backlight on a compact breakout board. It runs from either 3.3 V or 5 V and supports SPI, 4-bit, and 8-bit interfaces via the ST7036 c...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
