Breakouts

SKU: SF-SEN-24540 | Brand: SparkFun

Forget ultrasonic and infrared sensors; the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125 brings powerful 60 GHz radar technology to your projects. This sensor isn't limited to surface detection; it c...

SKU: AF-5906 | Brand: Adafruit

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...

SKU: SF-COM-23979 | Brand: SparkFun

Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...

SKU: SF-SEN-22494 | Brand: SparkFun

The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...

SKU: SF-SEN-21325 | Brand: SparkFun

Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled, SparkFun LSM6DSV16X 6DoF IMU Breakout. The LSM6DSV16X, from STMicroelectronics, is a high-performance,...

SKU: AF-5683 | Brand: Adafruit

The Adafruit microSD Card BFF Add-On slots onto the back of any QT Py or Xiao board, adding a microSD card slot for megabytes or gigabytes of file storage. Using the SPI bus (MOSI/MISO/SCK) plus one chip select pin, y...

SKU: AF-5637 | Brand: Adafruit

The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecti...

SKU: AF-5651 | Brand: Adafruit

An I2C breakout board for the RDA5807M FM radio chip, designed by ScoutMakes as a beginner-friendly introduction to electronics and wireless communications. Tune into FM stations, display RDS data (station and song na...

SKU: AF-5649 | Brand: Adafruit

The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit...

SKU: DF-SEN0537 | Brand: DFRobot

The ENS160 Air Quality Sensor uses ScioSense's ENS160 chip with TrueVOC and metal oxide (MOX) technology to monitor indoor air quality. It outputs TVOC (total volatile organic compounds), eCO2 (equivalent CO2), and AQ...

SKU: SF-SEN-19895 | Brand: SparkFun

The SparkFun 9DoF IMU Breakout combines the high-performance ISM330DHCX 3D accelerometer and gyroscope from STMicroelectronics with the MMC5983MA triple-axis magnetometer from MEMSIC, delivering nine degrees of freedo...

SKU: WS-14513 | Brand: Waveshare

An edge connector expansion board for the BBC micro:bit that breaks out all I/O pins to standard 2.54mm pitch pin headers for easy breadboard and jumper wire connections. Key Features Full Pin Breakout – All micro:...

SKU: DF-SEN0514 | Brand: DFRobot

This Gravity: ENS160 Air Quality Sensor, based on ScioSense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and offers detection of multiple IAQ data (TVOC, eCO2, AQI).The innovati...

SKU: DF-DFR0911 | Brand: DFRobot

The 2-Channel Level Converter translates 12V signals down to 3.3V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 3.3V microcontrollers like Arduino. It supports common...

SKU: AF-4120 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of green LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 12...

SKU: SF-SEN-17871 | Brand: SparkFun

This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. The KX132 is a low-power, 16-bit resolution three-axis accelerometer with four user-selectab...

SKU: DF-SEN0372 | Brand: DFRobot

This is a breakout version of BMP280 Barometric Pressure Sensor from DFRobot with temperature and pressure measurement functions, supporting Arduino code control.Housed in an extremely compact package, the BMP280 is b...

SKU: SF-BOB-16842 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of ...

SKU: AF-4683 | Brand: Adafruit

This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 3.3V output with up to 1.2A current. It's great for supplying power to popular 3.3V voltage circuits from a range of ...

SKU: AF-4567 | Brand: Adafruit

The Adafruit 2.23" Monochrome OLED Bonnet gives your Raspberry Pi a bright, high-contrast display that's easy to read from across the room. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and star...