Breakouts

SKU: AF-4407 | Brand: Adafruit

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcont...

SKU: LB-JSTBOARD | Brand: Little Bird

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...

SKU: AF-4101 | Brand: Adafruit

The Adafruit MCP9600 I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement for you. Simply connect your thermocouple, wire up I2C, and read accurate temperature data from virtually...

SKU: SF-DEV-09873 | Brand: SparkFun

The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, L...

SKU: AF-6251 | Brand: Adafruit

The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I...

SKU: DF-SEN0629 | Brand: DFRobot

  The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...

SKU: AF-5945 | Brand: Adafruit

The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...

SKU: WS-25411 | Brand: Waveshare

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support ...

SKU: SF-SEN-22396 | Brand: SparkFun

This SparkFun CO2 Humidity and Temperature Sensor features the next-generation SCD41 photoacoustic CO2 sensor for high-accuracy environmental readings. The SCD41 uses Sensirion's PASens® photoacoustic measurement syst...

SKU: AF-5728 | Brand: Adafruit

The Adafruit PiCowbell CAN Bus adds CAN bus connectivity to your Raspberry Pi Pico or Pico W, making it easy to interface with automotive, robotics, and industrial sensor networks. Built around the popular MCP2515 CAN...

SKU: DF-SEN0536 | Brand: DFRobot

The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...

SKU: SF-BOB-19626 | Brand: SparkFun

The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at diff...

SKU: SF-BOB-19389 | Brand: SparkFun

The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles. This board features an OpAmp to bring the output of the microphone to a usable level, allowing ...

SKU: SF-SEN-19013 | Brand: SparkFun

The SparkFun Qwiic Mini ToF Imager is a 64-pixel Time-of-Flight ranging sensor built around the STMicroelectronics VL53L5CX. It provides multizone distance measurements up to 4000 mm across a 4×4 or 8×8 grid with a 63...

SKU: DF-DFR0913 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...

SKU: SF-COM-18355 | Brand: SparkFun

The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512 kilo-bits (or 64 kilo-bytes) of storage, this product is great for any microcontroller ...

SKU: AF-4565 | Brand: Adafruit

The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift an...

SKU: AF-4569 | Brand: Adafruit

The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather boar...

SKU: SF-SEN-15440 | Brand: SparkFun

The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...

SKU: AF-2029 | Brand: Adafruit

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our ...