Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer
SKU: AF-5664 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH...
Delivered by Tue 25 Aug
SparkFun Qwiic micro:bit Breakout (with Headers)
SKU: SF-BOB-16446 | Brand: SparkFun
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and...
Delivered by Thu 3 Sep
Adafruit PiCowbell Proto for Pico - Reset Button & STEMMA QT
SKU: AF-5200 | Brand: Adafruit
The Adafruit PiCowbell Proto is a prototyping add-on board for the Raspberry Pi Pico and Pico W. It matches the Pico's footprint and sockets underneath, giving you a reset button, a STEMMA QT / Qwiic I2C connector, an...
Delivered by Wed 16 Sep
Adafruit PiCowbell Camera Breakout - Autofocus 120 Degree Lens
SKU: AF-5946 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus adds a 5-megapixel camera with a 120-degree wide-angle lens and autofocus motor to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or ...
Delivered by Wed 16 Sep
Adafruit PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer
SKU: AF-5626 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to eight same-address I2C devices with completely solderless wiring. Nine JST S...
Delivered by Wed 16 Sep
Adafruit PiCowbell Camera Breakout - Autofocus 72 Degree Lens
SKU: AF-5945 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...
Delivered by Tue 25 Aug
SparkFun CO₂ Humidity and Temperature Sensor - SCD41 (Qwiic)
SKU: SF-SEN-22396 | Brand: SparkFun
This SparkFun CO2 Humidity and Temperature Sensor features the next-generation SCD41 photoacoustic CO2 sensor for high-accuracy environmental readings. The SCD41 uses Sensirion's PASens® photoacoustic measurement syst...
Delivered by Thu 3 Sep
SparkFun Optical Tracking Odometry Sensor - PAA5160E1 (Qwiic)
SKU: SF-SEN-24904 | Brand: SparkFun
The SparkFun Qwiic Optical Tracking Odometry Sensor empowers you to elevate your robot's navigation capabilities with exceptional precision and streamlined integration. This compact, all-in-one sensor leverages the po...
Delivered by Thu 3 Sep
Adafruit Terminal PiCowbell for Pico with Pre-Soldered Sockets
SKU: AF-5907 | Brand: Adafruit
The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG...
Delivered by Tue 25 Aug
SparkFun Photoacoustic Spectroscopy CO2 Sensor - PASCO2V01 (Qwiic)
SKU: SF-SEN-22956 | Brand: SparkFun
The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...
Delivered by Thu 3 Sep
Adafruit PCA9546 4-Channel I2C Multiplexer
SKU: AF-5663 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a ...
Delivered by Wed 16 Sep
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
SKU: AF-4886 | Brand: Adafruit
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...
Delivered by Wed 16 Sep
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)
SKU: SF-BOB-16784 | Brand: SparkFun
The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communi...
Delivered by Thu 3 Sep
SparkFun Qwiic 12 Bit ADC - 4 Channel (ADS1015)
SKU: SF-DEV-15334 | Brand: SparkFun
A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channe...
Delivered by Thu 3 Sep
Adafruit BMP585 Ported I2C / SPI Temperature and Pressure Sensor
SKU: AF-6413 | Brand: Adafruit
The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...
Delivered by Wed 16 Sep
Adafruit Proto Doubler PiCowbell for Pico and PicoW
SKU: AF-5906 | Brand: Adafruit
The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...
Delivered by Tue 25 Aug
SparkFun Human Presence and Motion Sensor - STHS34PF80 (Qwiic)
SKU: SF-SEN-22494 | Brand: SparkFun
The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...
Delivered by Tue 25 Aug
SparkFun Micro 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22398 | Brand: SparkFun
The SparkFun BMI270 Micro 6DoF IMU Breakout is a Qwiic-enabled breakout board based on the ultra-low power BMI270 from Bosch. This chip is a highly integrated, low-power IMU optimized for wearables providing precise a...
Delivered by Thu 3 Sep
SparkFun 6DoF IMU Breakout - LSM6DSV16X (Qwiic)
SKU: SF-SEN-21325 | Brand: SparkFun
Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled, SparkFun LSM6DSV16X 6DoF IMU Breakout. The LSM6DSV16X, from STMicroelectronics, is a high-performance,...
Delivered by Thu 3 Sep
Adafruit QT 5V to 3V Shifter Breakout - STEMMA QT / Qwiic
SKU: AF-5637 | Brand: Adafruit
The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecti...
Delivered by Tue 25 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
