Breakouts

SKU: SF-GPS-15193 | Brand: SparkFun

The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...

SKU: DF-DFR0477 | Brand: DFRobot

The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...

SKU: SF-GPS-14414 | Brand: SparkFun

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...

SKU: SF-GPS-15136 | Brand: SparkFun

With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...

SKU: SF-SEN-15050 | Brand: SparkFun

The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light...

SKU: AF-2479 | Brand: Adafruit

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...

SKU: SF-BOB-08276 | Brand: SparkFun

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it b...

SKU: SF-SEN-11862 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple...

SKU: SF-GPS-13670 | Brand: SparkFun

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim de...

SKU: SF-DEV-13664 | Brand: SparkFun

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSA...

SKU: SF-BOB-12731 | Brand: SparkFun

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPR...

SKU: SF-WIG-09555 | Brand: SparkFun

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a fo...

SKU: SF-GPS-15005 | Brand: SparkFun

Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK...

SKU: SF-SEN-29854 | Brand: SparkFun

This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encr...

SKU: SF-WRL-21293 | Brand: SparkFun

Build low-power 2.4GHz Bluetooth beacon prototypes with this compact breakout based on the InPlay IN100 NanoBeacon. It is designed for wireless sensor monitoring, asset tracking, retail beacons and DIY beacon tags for...

SKU: SF-BOB-29196 | Brand: SparkFun

This compact breakout board makes it easy to bring a female DE9 connector, often called DB9, onto a breadboard or into a custom wiring harness.All nine connector pins are broken out to 0.1in-spaced plated through-hole...

SKU: SF-BOB-29197 | Brand: SparkFun

This compact breakout makes it straightforward to connect 3.3V microcontroller projects to legacy RS232 serial equipment such as older computers, industrial machines, GPS modules and other devices using a DE9, also kn...

SKU: SF-SEN-30381 | Brand: SparkFun

This breakout pairs the Feyman (FMI) IM19 9DoF IMU with a board layout made for high-accuracy PNT and RTK GNSS projects. It combines MEMS sensor data with external GNSS RTK positioning information to provide precise a...

SKU: SF-GPS-28871 | Brand: SparkFun

This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...

SKU: SF-GPS-28435 | Brand: SparkFun

Built around the u-blox F10 engine, this GNSS breakout receives L1 and L5 frequency bands simultaneously for reliable metre-level positioning, even in challenging environments such as dense urban canyons. u-blox multi...