Breakouts

SKU: DF-SEN0599 | Brand: DFRobot

An underwater ultrasonic obstacle avoidance sensor designed specifically for submerged applications. With an IP68 protection rating and a measurement range of 5–600 cm, it enables underwater vehicles to detect and avo...

SKU: DF-TEL0150 | Brand: DFRobot

##Introduction This is a CAN-to-UART and USB 1.0 communication module that is compatible with both 3.3V and 5V. It supports the CAN 2.0 protocol and incorporates the SLCAN command, eliminating the need for you to conc...

SKU: DF-SEN0598 | Brand: DFRobot

An IP68-rated ultrasonic obstacle avoidance sensor specifically designed for underwater applications. With a measurement range of 2–300cm and UART output, this compact sensor enables underwater vehicles and robots to ...

SKU: AF-5988 | Brand: Adafruit

The Adafruit RS-232 Full Pinout Level-Shifter Breakout lets you interface any 3.3 V microcontroller or single-board computer with RS-232 devices using all 8 data/flow-control signals. Built around the trusted TI MAX32...

SKU: SF-ROB-25167 | Brand: SparkFun

The SparkFun Mini Stepper Motor Driver empowers you to control bipolar stepper motors with ease and precision. This compact driver, measuring just 0.6in. by 0.8in. with breadboard-friendly 0.1in. pin spacing, shines i...

SKU: SF-GPS-23286 | Brand: SparkFun

The SparkFun Triband GNSS RTK Breakout features the UM980 GNSS high precision RTK position module from Unicore Communications. The UM980 is a 1408-Channel GNSS Receiver based on the Nebulas IV™ that is able to simulta...

SKU: DF-SEN0543 | Brand: DFRobot

This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward & backward, rotate clockwise & counterclockwise, rotate clockwise & counterclockwise continuously, hover, and...

SKU: AF-5568 | Brand: Adafruit

The Adafruit CH9102F Friend is a USB-to-Serial converter breakout featuring the affordable WCH CH9102F chip and a modern USB Type-C connector. It uploads code at up to 3 Mbit/s and includes auto-reset for Arduino/ATme...

SKU: SF-GPS-18378 | Brand: SparkFun

The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal acc...

SKU: SF-GPS-19663 | Brand: SparkFun

With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered d...

SKU: DF-DFR0578 | Brand: DFRobot

Gravity: I/O Expansion Shield for OpenMV Cam H7 & H7 Plus is an expansion shield specially designed for the OpenMV Cam H7 and OpenMV Cam H7 Plus. It is compatible with various sensors and electronic modules of Gravity...

SKU: DF-TEL0148 | Brand: DFRobot

Compared to the previous MicroSD Card Module, this Fermion: Serial Data Logger can store data more conveniently, and supports direct data printing through serial port without additional codes.The Serial Data Logger su...

SKU: DF-FIT0781 | Brand: DFRobot

A versatile USB-to-serial converter module supporting six conversion modes: USB-TTL, USB-232, USB-485, TTL-232, TTL-485, and 232-485. Switch between modes using onboard DIP switches — no need for multiple adapters. B...

SKU: EC-MCP00101P | Brand: Elecrow

This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for programming(Arduino Pro Mini), debug some hardware...

SKU: SF-GPS-17285 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive sign...

SKU: EC-MCS01107S | Brand: Elecrow

The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7)...

SKU: AF-4510 | Brand: Adafruit

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 socket and one line of push-terminal blocks. Just flick up the...

SKU: SF-GPS-15712 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the ...

SKU: SF-GPS-16329 | Brand: SparkFun

The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...

SKU: SF-GPS-15210 | Brand: SparkFun

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...