Breakouts

SKU: AF-4947 | Brand: Adafruit

The Adafruit 2.13" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 250×122 pixel display with black, red, and white ink, this breakout delivers high-contrast, d...

SKU: SF-SEN-17241 | Brand: SparkFun

The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...

SKU: EC-SIN16080E | Brand: Elecrow

The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most...

SKU: AF-4741 | Brand: Adafruit

The Adafruit Grayscale 1.5" OLED Display delivers 128×128 pixels with 16 levels of grayscale on a crisp, high-contrast OLED panel. Driven by the SSD1327 controller, it connects via I²C or SPI and includes STEMMA QT / ...

SKU: SF-ROB-16836 | Brand: SparkFun

The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extens...

SKU: DF-DFR0664 | Brand: DFRobot

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible ...

SKU: AF-4634 | Brand: Adafruit

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis ...

SKU: SF-KIT-15948 | Brand: SparkFun

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an ea...

SKU: AF-4502 | Brand: Adafruit

The Adafruit ISM330DHCX is an industrial-quality 6-DoF IMU from ST, combining a 3-axis accelerometer and 3-axis gyroscope on a single silicon die for synchronised measurements. With an extended gyroscope range of ±400...

SKU: DF-TEL0125 | Brand: DFRobot

The FireBeetle LoRa Radio 868 MHz is a wireless transmission cover board for the DFRobot FireBeetle series, featuring the Semtech SX1276 LoRa transceiver with a built-in power amplifier. It supports LoRa long-range mo...

SKU: AF-4313 | Brand: Adafruit

The Adafruit 1.3" 240×240 Wide Angle TFT LCD Display Breakout with MicroSD is a compact, high-density IPS screen driven by the ST7789 controller. With 240×240 pixels at 260 PPI in full 16-bit colour, it delivers sharp...

SKU: SF-LCD-15143 | Brand: SparkFun

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...

SKU: AF-4201 | Brand: Adafruit

Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: DF-DFR0477 | Brand: DFRobot

The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...

SKU: SF-DEV-15162 | Brand: SparkFun

The SparkFun gator:bit v2.0 is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads t...

SKU: SF-GPS-15136 | Brand: SparkFun

With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...

SKU: AF-1323 | Brand: Adafruit

Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 ...

SKU: AF-684 | Brand: Adafruit

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-...

SKU: PI-COM0205 | Brand: Pimoroni

The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...

SKU: AF-1480 | Brand: Adafruit

A 2.2″ TFT LCD breakout with 320 × 240 resolution and full 18-bit colour (262,144 shades), driven by an ILI9340 (or compatible) controller over 4-wire SPI. The onboard frame buffer means even low-memory microcontrolle...