Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit PiCowbell Adalogger for Pico - MicroSD, RTC & STEMMA QT
SKU: AF-5703 | Brand: Adafruit
The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2...
Delivered by Mon 16 Nov
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
SKU: SF-SEN-20844 | Brand: SparkFun
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...
Delivered by Fri 23 Oct
SparkFun Level Shifter - 8 Channel (TXS01018E)
SKU: SF-BOB-19626 | Brand: SparkFun
The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at diff...
Delivered by Tue 3 Nov
Adafruit 1.9" 320x170 Color IPS TFT Display
SKU: AF-5394 | Brand: Adafruit
The Adafruit 1.9" TFT is a wide-format IPS display featuring 320×170 pixels at 16-bit colour with viewing angles up to 80° in any direction. Driven by the ST7789 chipset over 4-wire SPI, this breakout works with any m...
Delivered by Fri 23 Oct
Adafruit SPI Non-Volatile FRAM Breakout - 2 Mbit / 256 KBytes - MB85RS2MTA
SKU: AF-4718 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...
Delivered by Fri 23 Oct
Adafruit SPI Non-Volatile FRAM Breakout - 4 Mbit / 512 KBytes - MB85RS4MT
SKU: AF-4719 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 4 Mbit (512 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...
Delivered by Fri 23 Oct
Monochrome 0.96 128x64 I2C/SPI OLED Display
SKU: DF-DFR0650 | Brand: DFRobot
This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low powe...
Delivered by Tue 3 Nov
Monochrome 1.3 128x64 OLED graphic display
SKU: AF-938 | Brand: Adafruit
A crisp 1.3" monochrome OLED display with 128×64 white pixels, driven by the SSD1306 controller. Each pixel is individually addressable, and because OLEDs emit their own light, no backlight is needed — resulting in ex...
Delivered by Mon 16 Nov
Adafruit HUZZAH32 – ESP32 Breakout Board
SKU: AF-4172 | Brand: Adafruit
The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a gener...
Delivered by Mon 16 Nov
ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI
SKU: AF-1231 | Brand: Adafruit
The ADXL345 from Analog Devices is a triple-axis digital accelerometer with both I2C and SPI interfaces. This breakout board includes an on-board 3.3V regulator and logic-level shifting, making it easy to interface wi...
Delivered by Fri 23 Oct
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
SKU: AF-1602 | Brand: Adafruit
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has ...
Delivered by Mon 16 Nov
Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)
SKU: AF-2809 | Brand: Adafruit
The Adafruit LIS3DH is a popular, low-power triple-axis accelerometer breakout packed with features typically found only on higher-end sensors. With selectable measurement ranges, multiple interface options, and built...
Delivered by Mon 16 Nov
SparkFun microSD Transflash Breakout
SKU: SF-BOB-00544 | Brand: SparkFun
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect fo...
Delivered by Tue 3 Nov
Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz
SKU: AF-3071 | Brand: Adafruit
The Adafruit RFM69HCW Transceiver Radio Breakout @ 433 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX1231 t...
Delivered by Mon 16 Nov
SparkFun Shift Register Breakout - 74HC595
SKU: SF-BOB-10680 | Brand: SparkFun
A breakout board for the SOIC version of the 74HC595 8-bit shift register IC. Shift registers let you expand the number of digital outputs available on your microcontroller by clocking in serial data and latching it t...
Delivered by Fri 23 Oct
SparkFun microSD Sniffer
SKU: SF-TOL-09419 | Brand: SparkFun
The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card int...
Delivered by Tue 3 Nov
Adafruit Proto Tripler PiCowbell for Pico and PicoW
SKU: AF-5967 | Brand: Adafruit
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It al...
Delivered by Fri 23 Oct
Adafruit CAN Bus FeatherWing - MCP2515
SKU: AF-5709 | Brand: Adafruit
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...
Delivered by Fri 23 Oct
SparkFun USB-C Host Shield
SKU: SF-DEV-21247 | Brand: SparkFun
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...
Delivered by Fri 23 Oct
SparkFun Atmospheric Sensor Breakout - BME280 (with Headers)
SKU: SF-SEN-13905 | Brand: SparkFun
The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature in a compact package. This version comes with headers pre-soldered for easy breadboard use or direct wir...
Delivered by Tue 3 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
