Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit BMP388 - Precision Barometric Pressure and Altimeter
SKU: AF-3966 | Brand: Adafruit
The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...
Delivered by Fri 23 Oct
Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865
SKU: AF-3648 | Brand: Adafruit
The Adafruit PT1000 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter, configured for PT1000 platinum resistance temperature detectors. It reads 2-, 3-, or 4-wire...
Delivered by Mon 16 Nov
SparkFun OpenLog Artemis (without IMU)
SKU: SF-DEV-19426 | Brand: SparkFun
The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-en...
Delivered by Fri 23 Oct
High Power 100mW 2.4G Wireless Transceiver Module RF Communication NRF24L01P+PA
SKU: EC-CRF19969D | Brand: Elecrow
AS01-ML01DP5 is a 2.4GHZ100mW, high speed (maximum air speed up to 2Mbps) high stability, industrial grade wireless transceiver integrated digital transmission module. Module uses nRF24L01P RF chip and RFX2401C power ...
Delivered by Fri 23 Oct
Adafruit 1.14 240x135 Color TFT Display + MicroSD Card Breakout - ST7789
SKU: AF-4383 | Brand: Adafruit
The Adafruit 1.14" 240×135 Colour TFT Display Breakout with MicroSD is a compact, high-density IPS display driven by the ST7789 controller. With 240×135 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibr...
Delivered by Mon 16 Nov
Analog to Digital Converter - MCP3002
SKU: SF-COM-08636 | Brand: SparkFun
The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...
Delivered by Fri 23 Oct
SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA
SKU: SF-GPS-24114 | Brand: SparkFun
The SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA is a standard precision GNSS board with meter-level positional accuracy. The NEO-F10N uses the L1/L5 bands instead of the more commonly seen L1/L2 bands. Utilizing the ...
Delivered by Tue 3 Nov
Adafruit PiCowbell Camera Breakout - Autofocus 120 Degree Lens
SKU: AF-5946 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus adds a 5-megapixel camera with a 120-degree wide-angle lens and autofocus motor to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or ...
Delivered by Mon 16 Nov
Adafruit SPI FLASH Breakout - W25Q64 - 64 MBit / 8 MByte
SKU: AF-5636 | Brand: Adafruit
The Adafruit SPI FLASH Breakout features a W25Q64 chip providing 64 Mbit (8 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcontrol...
Delivered by Fri 23 Oct
Fermion: 1.51" OLED Transparent Display with Converter (Breakout)
SKU: DF-DFR0934 | Brand: DFRobot
This is a 1.51” SSD1309 transparent monochrome OLED display (light blue) with a converter. It offers a resolution of 128×64 (The completely transparent area is 128×56. There is a small section near the pins t...
Delivered by Tue 3 Nov
Adafruit 24-Channel 12-bit PWM LED Driver - SPI Interface [TLC5947]
SKU: AF-1429 | Brand: Adafruit
Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if t...
Delivered by Mon 16 Nov
3.5 TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket [HXD8357D]
SKU: AF-2050 | Brand: Adafruit
A large 3.5" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 480×320 pixel display is driven by the HX8357D chipset and features a bright 6-LED white backlight. The b...
Delivered by Mon 16 Nov
Fermion: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0629 | Brand: DFRobot
The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...
Delivered by Tue 3 Nov
Adafruit PiCowbell Camera Breakout - Autofocus 72 Degree Lens
SKU: AF-5945 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...
Delivered by Fri 23 Oct
Adafruit PiCowbell CAN Bus for Pico - MCP2515 CAN Controller
SKU: AF-5728 | Brand: Adafruit
The Adafruit PiCowbell CAN Bus adds CAN bus connectivity to your Raspberry Pi Pico or Pico W, making it easy to interface with automotive, robotics, and industrial sensor networks. Built around the popular MCP2515 CAN...
Delivered by Fri 23 Oct
Adafruit PiCowbell Adalogger for Pico - MicroSD, RTC & STEMMA QT
SKU: AF-5703 | Brand: Adafruit
The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2...
Delivered by Mon 16 Nov
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
SKU: SF-SEN-20844 | Brand: SparkFun
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...
Delivered by Fri 23 Oct
SparkFun Level Shifter - 8 Channel (TXS01018E)
SKU: SF-BOB-19626 | Brand: SparkFun
The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at diff...
Delivered by Tue 3 Nov
Adafruit 1.9" 320x170 Color IPS TFT Display
SKU: AF-5394 | Brand: Adafruit
The Adafruit 1.9" TFT is a wide-format IPS display featuring 320×170 pixels at 16-bit colour with viewing angles up to 80° in any direction. Driven by the ST7789 chipset over 4-wire SPI, this breakout works with any m...
Delivered by Fri 23 Oct
Adafruit SPI Non-Volatile FRAM Breakout - 2 Mbit / 256 KBytes - MB85RS2MTA
SKU: AF-4718 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...
Delivered by Fri 23 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared