Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
SparkFun Triple Axis Digital Accelerometer Breakout - ADXL313 (Qwiic)
SKU: SF-SEN-17241 | Brand: SparkFun
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...
Out of stock
Adafruit Grayscale 1.5 128x128 OLED Graphic Display - STEMMA QT / Qwiic
SKU: AF-4741 | Brand: Adafruit
The Adafruit Grayscale 1.5" OLED Display delivers 128×128 pixels with 16 levels of grayscale on a crisp, high-contrast OLED panel. Driven by the SSD1327 controller, it connects via I²C or SPI and includes STEMMA QT / ...
Out of stock
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)
SKU: SF-ROB-16836 | Brand: SparkFun
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extens...
Out of stock
CJMCU FT232H High Speed Multifunctional USB to JTAG UART/FIFO SPI/I2C Module For Arduino
SKU: EC-ARP02016U | Brand: Elecrow
The CJMCU FT232H module is a versatile USB-to-serial/parallel interface breakout based on the FTDI FT232H chip. It supports USB conversion to UART, FIFO, JTAG, SPI, and I2C interfaces, with the entire USB protocol han...
Out of stock
Adafruit 1.54 Monochrome eInk / ePaper Display with SRAM - 200x200 Monochrome
SKU: AF-4196 | Brand: Adafruit
The Adafruit 1.54" Monochrome eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel black-and-white display, this breakout delivers high-contrast, daylight-readabl...
Out of stock
MDBT42Q Breakout
SKU: PI-ESP004 | Brand: Pimoroni
This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...
Out of stock
Adafruit 2.7 Tri-Color eInk / ePaper Display with SRAM - Red Black White
SKU: AF-4098 | Brand: Adafruit
Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.7" breakout board. The panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power com...
Out of stock
Display-O-Tron Breakout
SKU: PR-PIM146 | Brand: Little Bird
The Display-O-Tron Breakout pairs a high-contrast 16 × 3 character LCD with an RGB backlight on a compact breakout board. It runs from either 3.3 V or 5 V and supports SPI, 4-bit, and 8-bit interfaces via the ST7036 c...
Out of stock
SparkFun Triple Axis Accelerometer Breakout - H3LIS331DL
SKU: SF-SEN-14480 | Brand: SparkFun
The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for ...
Out of stock
SparkFun Triple Axis Accelerometer Breakout - LIS3DH
SKU: SF-SEN-13963 | Brand: SparkFun
The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three addi...
Out of stock
SparkFun SAMD21 Dev Breakout
SKU: SF-DEV-13672 | Brand: SparkFun
If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing spot. The SparkFun SAMD21 Dev Breakout is an Arduino-sized breakout for the ...
Out of stock
1.8 SPI TFT display, 160x128 18-bit color - ST7735R driver
SKU: AF-618 | Brand: Adafruit
A compact 1.8" TFT display with true 18-bit colour (262,144 shades) and 160 × 128 resolution. It uses a simple SPI interface requiring only 4–5 digital pins and features two white LED backlights running on 3.3 V. Driv...
Out of stock
LIS3DH Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29528 | Brand: SparkFun
Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...
Out of stock
3.5in 320x480 Capacitive Touch TFT Breakout Board
SKU: AF-5846 | Brand: Adafruit
This colour touchscreen LCD gives your project a bright, high-resolution interface with a 3.5" diagonal TFT panel and capacitive touch already attached. With 480x320 pixels and individual RGB pixel control, it offers ...
Out of stock
LoRa 1W 915MHz Breakout - 915M30S
SKU: SF-SPX-18572 | Brand: SparkFun
This breakout is built around the EBYTE 915M30S module, giving you a 1W (30dBm) LoRa transceiver for long-range, low-data-rate wireless projects. LoRa is well suited to links over long distances, low-power sleep opera...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
