Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit LPS28 (LPS28DFW) Pressure Sensor - STEMMA QT / Qwiic
SKU: AF-6067 | Brand: Adafruit
The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...
Delivered by Tue 14 Jul
Adafruit INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor
SKU: AF-6062 | Brand: Adafruit
The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...
Delivered by Tue 14 Jul
SparkFun Ultrasonic Distance Sensor - TCT40 (Qwiic)
SKU: SF-SEN-24805 | Brand: SparkFun
The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...
Delivered by Fri 3 Jul
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Delivered by Tue 14 Jul
ADS122C04 24-Bit 4-Channel I2C ADC Breakout
SKU: AF-6432 | Brand: Adafruit
This breakout is built around TI's ADS122C04, a high-resolution analogue-to-digital converter that lets you measure very small single-ended or differential signals over I2C. It offers 24-bit conversion with data rates...
Delivered by Tue 14 Jul
Qwiic MCP4725 12-Bit DAC Breakout
SKU: SF-BOB-31206 | Brand: SparkFun
Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connecti...
Delivered by Fri 3 Jul
I2C to 8-Channel Solenoid Driver
SKU: AF-6318 | Brand: Adafruit
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, indu...
Delivered by Tue 14 Jul
SGP41 VOC & NOx Gas Sensor Breakout
SKU: AF-6455 | Brand: Adafruit
Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...
Delivered by Tue 14 Jul
GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)
SKU: SF-GPS-22693 | Brand: SparkFun
This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...
Delivered by Fri 3 Jul
VCNL4200 Long Distance IR Proximity & Light Sensor Breakout
SKU: AF-6064 | Brand: Adafruit
Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light se...
Delivered by Tue 14 Jul
Adafruit Sensirion SHT45 Precision Temp & Humidity with PTFE
SKU: AF-6174 | Brand: Adafruit
The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...
Out of stock
Adafruit HDC3021 Precision Temperature & Humidity Sensor
SKU: AF-5989 | Brand: Adafruit
The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...
Out of stock
APDS9999 Proximity, Lux & Colour Sensor
SKU: AF-6461 | Brand: Adafruit
This compact breakout combines RGB colour sensing, true lux light measurement and infrared proximity detection in one I2C device. With library code running on your microcontroller, it can read red, green, blue and cle...
Out of stock
Qwiic 24-Bit 4-Channel ADC Breakout - ADS1219
SKU: SF-SEN-27544 | Brand: SparkFun
When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channe...
Out of stock
TMAG5273 A1 3D Hall Effect Magnetometer Breakout
SKU: AF-6489 | Brand: Adafruit
This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements o...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
