Breakouts

SKU: AF-5906 | Brand: Adafruit

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...

SKU: SF-COM-23979 | Brand: SparkFun

Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...

SKU: WS-14513 | Brand: Waveshare

An edge connector expansion board for the BBC micro:bit that breaks out all I/O pins to standard 2.54mm pitch pin headers for easy breadboard and jumper wire connections. Key Features Full Pin Breakout – All micro:...

SKU: AF-5095 | Brand: Adafruit

A screw-terminal breakout module for the Raspberry Pi Pico, designed for industrial, robotics, and prototyping applications where secure, tool-free wiring is essential. Every GPIO pin is broken out to labelled termina...

SKU: DF-MBT0008 | Brand: DFRobot

The micro:IO Extender is a compact expansion board for the BBC micro:bit that breaks out all 19 I/O pins as Gravity-compatible 3-pin headers. It provides plug-and-play access to the full range of micro:bit GPIO, along...

SKU: SF-PRT-15353 | Brand: SparkFun

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project...

SKU: SF-PRT-14765 | Brand: SparkFun

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...

SKU: SF-ROB-14450 | Brand: SparkFun

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-bra...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: SF-BOB-11771 | Brand: SparkFun

This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing. This 4-bit noninverting translator uses two separate...

SKU: SF-BOB-13717 | Brand: SparkFun

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decou...

SKU: SF-BOB-13282 | Brand: SparkFun

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Severa...

SKU: SF-PRT-11214 | Brand: SparkFun

MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also ha...

SKU: SF-COM-10468 | Brand: SparkFun

The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...

SKU: DF-DFR0411 | Brand: DFRobot

INTRODUCTION This DC motor has an integrated transistor built in to the board, eliminating the need for a motor driver. Use PWM to control it for all your DIY project needs. It uses the 3 pi...

SKU: SF-ROB-09454 | Brand: SparkFun

The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...

SKU: SF-GPS-28929 | Brand: SparkFun

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG...

SKU: SF-BOB-28467 | Brand: SparkFun

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 ...

SKU: DF-DFR1037 | Brand: DFRobot

##Introduction This is a 2-channel analog voltage output DAC module with PWM communication, 8-bit resolution, and 0.5% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, ...

SKU: AF-5948 | Brand: Adafruit

The Adafruit PiCowbell OV5640 Camera Breakout adds a 5-megapixel camera with a 120-degree low-distortion wide-angle lens to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or use the OV5640's bui...