Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Assembled Pi T-Cobbler Plus - GPIO Breakout [Pi A+, B+, Pi 2, Pi 3, Zero]
SKU: AF-2028 | Brand: Adafruit
This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40...
Delivered by Tue 23 Jun
Adafruit CAN Pal - CAN Bus Transciever
SKU: AF-5708 | Brand: Adafruit
The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...
Delivered by Mon 13 Jul
SparkFun Qwiic micro:bit Breakout (with Headers)
SKU: SF-BOB-16446 | Brand: SparkFun
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and...
Delivered by Thu 2 Jul
Assembled Pi Cobbler Plus - Breakout Cable [for Pi B+/A+/Pi 2/Pi 3]
SKU: AF-2029 | Brand: Adafruit
The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our ...
Delivered by Tue 23 Jun
Adafruit HUZZAH ESP8266 Breakout
SKU: AF-2471 | Brand: Adafruit
The Adafruit HUZZAH ESP8266 Breakout is a breadboard-friendly WiFi microcontroller board built around the Espressif ESP8266. With an 80 MHz processor, full WiFi client and access point support, a built-in TCP/IP stack...
Delivered by Tue 23 Jun
Adafruit Power Relay FeatherWing
SKU: AF-3191 | Brand: Adafruit
The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 1...
Delivered by Mon 13 Jul
Assembled Terminal Block Breakout FeatherWing for all Feathers
SKU: AF-2926 | Brand: Adafruit
The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...
Delivered by Tue 23 Jun
Adafruit 2.23 Monochrome OLED Bonnet for Raspberry Pi
SKU: AF-4567 | Brand: Adafruit
The Adafruit 2.23" Monochrome OLED Bonnet gives your Raspberry Pi a bright, high-contrast display that's easy to read from across the room. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and star...
Delivered by Mon 13 Jul
Pi-EzConnect Terminal Block Breakout HAT
SKU: AF-2711 | Brand: Adafruit
With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderl...
Delivered by Mon 13 Jul
Adafruit Audio BFF Add-on for QT Py and Xiao
SKU: AF-5769 | Brand: Adafruit
The Adafruit Audio BFF is a compact add-on board that turns your QT Py or Xiao into a powerful audio playback device. It features a microSD card slot (up to 64 GB) and a MAX98357 I2S 3W amplifier, all designed to fit ...
Delivered by Tue 23 Jun
Adafruit NeoKey BFF for Mechanical Key Add-On for QT Py and Xiao
SKU: AF-5695 | Brand: Adafruit
The Adafruit NeoKey BFF adds a single mechanical key switch with RGB backlighting to any QT Py or Xiao board. Designed to solder or plug onto the back of your QT Py, it features a Kailh hot-swap socket for tool-free M...
Delivered by Tue 23 Jun
Adafruit DragonTail for micro:bit - Fully Assembled
SKU: AF-3695 | Brand: Adafruit
The Adafruit DragonTail for micro:bit breaks out all of the micro:bit's edge connector pads to standard 0.1" headers for easy breadboard use. Simply slot your micro:bit into the card-edge connector and every pin — inc...
Delivered by Mon 13 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
