Breakouts

SKU: AF-5836 | Brand: Adafruit

This breakout adds eight analogue input channels over I2C, making it a handy way to read potentiometers, LDRs, flex sensors and other analogue or resistive sensors from boards that need more ADC inputs. It’s especiall...

SKU: AF-5811 | Brand: Adafruit

This compact breakout gives you a high-resolution analogue voltage output from a simple I2C interface, based on the AD5693R 16-bit DAC. It includes a temperature-compensated 2.5V internal reference, making it a handy ...

SKU: AF-5892 | Brand: Adafruit

This breakout makes it much easier to use the tiny MAX4544 SPDT analogue switch in prototypes and one-off builds. It gives you a solid-state alternative to a relay for switching between two analogue signal paths, with...

SKU: AF-6359 | Brand: Adafruit

This breakout lets you add an ideal diode to a higher-current DC power path without the usual forward voltage drop of a standard diode. It is designed for 3~23V DC supplies and up to 5A, using the LM73100's back-to-ba...

SKU: SF-SEN-24409 | Brand: SparkFun

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...

SKU: DF-DFR1229 | Brand: DFRobot

This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applica...

SKU: DF-DFR1230 | Brand: DFRobot

This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-...

SKU: EC-MCS01005S | Brand: Elecrow

This Arduino Nano IO Shield can easy support Nano and Pro. Because the Arduino Nano and Pro is too small to connect to jumper wires or breadboard. So this Nano IO Shield is born. The shield has lead out all IOs of ...

SKU: AF-5791 | Brand: Adafruit

The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can de...

SKU: PL-2453 | Brand: Pololu

A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred...

SKU: LB-ANEMO | Brand: Little Bird

A robust three-cup anemometer with 4–20mA current loop output, ideal for industrial monitoring and control applications. The all-aluminium construction provides excellent weather resistance, while the wear-free rotati...

SKU: SF-DEV-15334 | Brand: SparkFun

A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channe...

SKU: AF-1752 | Brand: Adafruit

A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks ...

SKU: AF-4493 | Brand: Adafruit

For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching  JST PH 3-Pin to Male Header Cables - 200mm,...

SKU: PL-1643 | Brand: Pololu

Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analog voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and ...

SKU: M5-U051 | Brand: Little Bird

Including 7 Different Units: Ext.IO, Proto, Relay, 3.96, RS485, DAC, ADC  

SKU: AF-4309 | Brand: Adafruit

The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have ...

SKU: TR-GIZLIGHT | Brand: 4tronix

The Playground system is an easy way to connect from Crumble, Raspberry Pi or BBC micro:bit to useful GizmosThe Light Sensor Gizmo provides an easy way to connect an Analog input which varies with the brightness of th...

SKU: AF-3695 | Brand: Adafruit

The Adafruit DragonTail for micro:bit breaks out all of the micro:bit's edge connector pads to standard 0.1" headers for easy breadboard use. Simply slot your micro:bit into the card-edge connector and every pin — inc...

SKU: PR-PIM199 | Brand: Little Bird

Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi! A more diminutive version of our popular Explorer Hat Pro, it's cheaper and designed to fit perfectly on a Raspberry Pi ...