Breakouts

SKU: EC-MCP00101P | Brand: Elecrow

This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for programming(Arduino Pro Mini), debug some hardware...

SKU: SF-PRT-17253 | Brand: SparkFun

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle, SMD pins. Add this part to your board to create a handy...

SKU: AF-4510 | Brand: Adafruit

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 socket and one line of push-terminal blocks. Just flick up the...

SKU: AF-3695 | Brand: Adafruit

The Adafruit DragonTail for micro:bit breaks out all of the micro:bit's edge connector pads to standard 0.1" headers for easy breadboard use. Simply slot your micro:bit into the card-edge connector and every pin — inc...

SKU: AF-1199 | Brand: Adafruit

A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin he...

SKU: AF-1325 | Brand: Adafruit

The Adafruit FPC Stick is a double-sided adapter PCB for connecting to 0.5 mm or 1.0 mm pitch flat flexible cables (FPCs). One side accommodates 0.5 mm pitch connectors, while the other handles 1.0 mm pitch — and it c...

SKU: AF-1436 | Brand: Adafruit

The Adafruit Multi-pitch FPC Adapter breaks out 40 pins of flexible printed circuit (FPC) cable to standard 0.1" spaced headers for easy breadboard prototyping. With pads for 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, and 1.0 mm...

SKU: AF-1465 | Brand: Adafruit

Stop searching for the AVR ISP pinout every time you program. This simple breakout adapter converts the standard 2×3 AVR ISP box header to two breadboard-friendly 1×3 rows, making it easy to wire up your programmer wi...

SKU: AF-1492 | Brand: Adafruit

Break out those tricky 0.5 mm pitch flex cable connections to breadboard-friendly 0.1" spaced headers with this FPC adapter board. The 50-pin connector on top accommodates most ZIF and snap-style FPC connectors, and e...

SKU: AF-2105 | Brand: Adafruit

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket stra...

SKU: SF-DEV-14050 | Brand: SparkFun

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for a...

SKU: SF-BOB-00496 | Brand: SparkFun

The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...

SKU: SF-BOB-00495 | Brand: SparkFun

A simple breakout PCB that adapts a 20-pin SOIC package IC to standard 0.1″ DIP headers for easy breadboard prototyping. Solder your SOIC chip to the board and plug it straight into a breadboard or socket. Key Featur...

SKU: AF-3182 | Brand: Adafruit

The Pimoroni Mini Black HAT Hack3r breaks out all 40 GPIO pins from your Raspberry Pi while still allowing a HAT or pHAT to sit on top. Connect via the included ribbon cable and access every pin — labelled with functi...

SKU: AF-3173 | Brand: Adafruit

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your ...

SKU: SF-PRT-12769 | Brand: SparkFun

Add SD card storage to your next project with this simple, through-hole SD/MMC socket. SD and MMC cards communicate over an SPI serial bus (as well as a 4-bit proprietary bus), making them easy to interface with micro...

SKU: SF-BOB-12731 | Brand: SparkFun

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPR...

SKU: SF-BOB-09966 | Brand: SparkFun

A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregu...

SKU: SF-BOB-16998 | Brand: SparkFun

Add a reversible USB-C connector to your project without hand-soldering the tiny SMD pads. This horizontal breakout makes it easier to bring USB-C power and data connections onto a prototype or custom build.The board ...

SKU: SF-BOB-29195 | Brand: SparkFun

This compact breakout board makes it easy to work with a male DE9 connector, commonly referred to as DB9. It brings the connector out to a maker-friendly plated through-hole header, so you can wire it into prototypes,...