Breakouts

SKU: AF-1764 | Brand: Adafruit

Simple but effective - this breakout board has a USB Mini-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.Comes with one fully...

SKU: AF-1754 | Brand: Adafruit

The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read...

SKU: AF-2104 | Brand: Adafruit

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles...

SKU: AF-2101 | Brand: Adafruit

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socke...

SKU: AF-2270 | Brand: Adafruit

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in...

SKU: SF-PRT-14322 | Brand: SparkFun

These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 stackable header...

SKU: DF-DFR0164 | Brand: DFRobot

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no ...

SKU: AF-2711 | Brand: Adafruit

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderl...

SKU: AF-2743 | Brand: Adafruit

This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.  It's helpful for using products like the JTAGulator, STLink or SEGG...

SKU: AF-2913 | Brand: Adafruit

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks,...

SKU: SF-BOB-13830 | Brand: SparkFun

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boa...

SKU: SF-DEV-13746 | Brand: SparkFun

The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to ...

SKU: SF-BOB-13717 | Brand: SparkFun

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decou...

SKU: AF-284 | Brand: Adafruit

Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14 - read more. Long gone are the days of parallel ports and ...

SKU: AF-3120 | Brand: Adafruit

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket to Terminal Block Breakout. You get a nice solid PCB with an HDMI socket and two strips of terminal blocks that you can use with stra...

SKU: AF-3121 | Brand: Adafruit

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket Breakout. You get a nice solid PCB with an HDMI socket that you can solder to assemble your own wiring jigs. You can add in s...

SKU: AF-3124 | Brand: Adafruit

Make your own custom DE-15 cable or DE-15 interface with ease, using this DE-15 Socket to Terminal Block Breakout. You get a nice solid PCB with an DE-15 socket and two strips of terminal blocks that you can use with ...

SKU: AF-334 | Brand: Adafruit

If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite...

SKU: SF-BOB-13263 | Brand: SparkFun

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino board...

SKU: SF-PRT-10877 | Brand: SparkFun

This 2×3 (6-pin) shrouded header with 2.54 mm (0.1″) pitch provides a keyed connection that prevents cable mishaps. The shroud ensures correct orientation when connecting ribbon cables or IDC connectors. Key Features...