Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
SparkFun FTDI Basic Breakout - 3.3V
SKU: SF-DEV-09873 | Brand: SparkFun
The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, L...
Delivered by Wed 24 Jun
Adafruit Sensiron SHT31-D Temperature Humidity Sensor Breakout
SKU: AF-2857 | Brand: Adafruit
The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor...
Delivered by Wed 24 Jun
Arduino RS232 to TTL Converter with DB9 (MAX202)
SKU: DF-DFR0077 | Brand: DFRobot
This converter uses MAX202-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial.RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehic...
Delivered by Wed 24 Jun
Adafruit USB Type C CC Resistor Fixer
SKU: AF-6323 | Brand: Adafruit
The Adafruit USB Type C CC Resistor Fixer solves a common problem: USB-C devices that won't power or communicate when plugged into another USB-C port. Many devices are missing the two 5.1K CC (Configuration Channel) r...
Delivered by Wed 24 Jun
Adafruit Pixel Shifter - For Addressable LEDs
SKU: AF-6066 | Brand: Adafruit
The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not be...
Delivered by Wed 24 Jun
Adafruit NeoPixel Breakout with JST SH Connectors
SKU: AF-5975 | Brand: Adafruit
A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works...
Delivered by Wed 24 Jun
Adafruit PiCowbell Camera Breakout - Autofocus 72 Degree Lens
SKU: AF-5945 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...
Delivered by Wed 24 Jun
USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V
SKU: WS-25411 | Brand: Waveshare
USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support ...
Delivered by Wed 24 Jun
Fermion: MEMS Ethanol EtOH Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0569 | Brand: DFRobot
The Fermion MEMS Ethanol (EtOH) Gas Detection Sensor uses micro-electromechanical system (MEMS) technology for compact, low-power ethanol gas detection. With a detection range of 1–500 ppm, it provides qualitative mea...
Delivered by Wed 24 Jun
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0568 | Brand: DFRobot
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...
Delivered by Wed 24 Jun
Adafruit PiCowbell CAN Bus for Pico - MCP2515 CAN Controller
SKU: AF-5728 | Brand: Adafruit
The Adafruit PiCowbell CAN Bus adds CAN bus connectivity to your Raspberry Pi Pico or Pico W, making it easy to interface with automotive, robotics, and industrial sensor networks. Built around the popular MCP2515 CAN...
Delivered by Wed 24 Jun
Gravity: I2C SCD41 Infrared CO2 Sensor (400 - 5000 ppm)
SKU: DF-SEN0536 | Brand: DFRobot
The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...
Delivered by Wed 24 Jun
Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic
SKU: AF-5690 | Brand: Adafruit
The Adafruit ATtiny1616 Breakout with seesaw is a versatile development board that combines an ATtiny1616 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. It works as both a standalon...
Delivered by Wed 24 Jun
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
SKU: AF-5640 | Brand: Adafruit
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connector...
Delivered by Wed 24 Jun
RJ45 Terminal Block Adapter - Horizontal
SKU: DF-FIT0852 | Brand: DFRobot
This DIN Rail RJ45 Terminal Block Adapter-Horizontal, perfect for simplifying complex wiring, consists of an RJ45 Ethernet jack and an eight-port terminal. You can connect an RJ45 Ethernet to PCB which can be DIN rai...
Delivered by Wed 24 Jun
IO Expansion Hat for Raspberry Pi 3/4/400
SKU: DF-DFR0828 | Brand: DFRobot
When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is ...
Delivered by Wed 24 Jun
4-Channel Level Converter (12V to 3.3V)
SKU: DF-DFR0913 | Brand: DFRobot
This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...
Delivered by Wed 24 Jun
Infrared Detector
SKU: SF-SEN-19018 | Brand: SparkFun
An Infrared detector is a detector that reacts to infrared (IR) radiation. These simple devices operate at 940nm and work well for generic IR systems including remote control and touch-less object sensing. Using a sim...
Delivered by Wed 24 Jun
Humidity and Temperature Sensor - DHT20
SKU: SF-SEN-18364 | Brand: SparkFun
The DHT20 is a factory-calibrated digital humidity and temperature sensor with an I²C interface. An upgrade to the popular DHT11/DHT22 series, it provides reliable environmental measurements without requiring addition...
Delivered by Wed 24 Jun
Ambient Light Sensor(0-200klx)
SKU: DF-SEN0390 | Brand: DFRobot
A high-precision ambient light sensor housed in a transparent semisphere case for optimal light-gathering performance. With a wide 0–200 klx detection range and I2C communication, this sensor is ideal for applications...
Delivered by Wed 24 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
