Breakouts

SKU: AF-1897 | Brand: Adafruit

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...

SKU: SF-BOB-10160 | Brand: SparkFun

Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal. Th...

SKU: SF-BOB-10124 | Brand: SparkFun

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can re...

SKU: DF-SEN0220 | Brand: DFRobot

The Gravity UART Infrared CO2 Sensor uses non-dispersive infrared (NDIR) technology to measure carbon dioxide concentrations from 0 to 50,000 ppm. It offers excellent selectivity with no oxygen dependency, built-in te...

SKU: SF-ROB-09454 | Brand: SparkFun

The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...

SKU: PL-2126 | Brand: Pololu

A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...

SKU: SF-LCD-29467 | Brand: SparkFun

  The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics ...

SKU: SF-COM-00650 | Brand: SparkFun

The FT232RL is a popular USB-to-UART bridge IC from FTDI, featuring a built-in EEPROM and oscillator for minimal external component requirements. It comes in a 28-pin SSOP package that can be hand-soldered, making it ...

SKU: LB-COCKATOO-V2 | Brand: Little Bird

The Cockatoo v2 is a simple breakout board for the BBC micro:bit, designed for school projects involving basic lighting circuits. Slide the micro:bit into the edge connector and access three pins — Pin 2, 3.3 V, and G...

SKU: AF-5769 | Brand: Adafruit

The Adafruit Audio BFF is a compact add-on board that turns your QT Py or Xiao into a powerful audio playback device. It features a microSD card slot (up to 64 GB) and a MAX98357 I2S 3W amplifier, all designed to fit ...

SKU: DF-SEN0543 | Brand: DFRobot

This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward & backward, rotate clockwise & counterclockwise, rotate clockwise & counterclockwise continuously, hover, and...

SKU: AF-5695 | Brand: Adafruit

The Adafruit NeoKey BFF adds a single mechanical key switch with RGB backlighting to any QT Py or Xiao board. Designed to solder or plug onto the back of your QT Py, it features a Kailh hot-swap socket for tool-free M...

SKU: AF-4464 | Brand: Adafruit

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...

SKU: PR-PIM532 | Brand: Little Bird

Breakout Garden plugs into your shiny new Pi 400's GPIO pins and lets you connect up to three of our extensive selection of Pimoroni breakouts so they're conveniently facing towards you and the right way up. We've got...

SKU: PL-1317 | Brand: Pololu

This compact USB-to-serial adapter lets you easily connect TTL serial devices to a computer, where it appears as a virtual COM port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge, pr...

SKU: SF-DEV-17119 | Brand: SparkFun

The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teen...

SKU: AF-4627 | Brand: Adafruit

The Adafruit H3LIS331 is an ultra-high-range triple-axis accelerometer capable of measuring up to ±400g across all three axes. Part of the ST LIS331 family, it's designed for applications where standard ±16g accelerom...

SKU: EC-RPA01921N | Brand: Elecrow

We all know that the core system of Raspberry Pi Zero is Linux, and without NIC inconvenient. However, most of the operations are based on linux’s command line via ssh service, that’s why we introduce this product.Thi...

SKU: SF-GPS-15733 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...

SKU: M5-U070 | Brand: Little Bird

The M5StickC Yun HAT is a cloud-shaped multi-sensor environmental monitoring accessory designed to mount on the M5StickC via the top socket. It integrates a temperature and humidity sensor (SHT20), barometric pressure...