Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit TSL2591 High Dynamic Range Digital Light Sensor
SKU: AF-1980 | Brand: Adafruit
The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-s...
Delivered by Fri 23 Oct
Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865
SKU: AF-3328 | Brand: Adafruit
The Adafruit PT100 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter. It reads 2-, 3-, or 4-wire PT100 platinum resistance temperature detectors over SPI, deliver...
Delivered by Fri 23 Oct
Fermion: MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm)
SKU: DF-SEN0565 | Brand: DFRobot
Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...
Delivered by Fri 23 Oct
SparkFun OpenLog Artemis (without IMU)
SKU: SF-DEV-19426 | Brand: SparkFun
The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-en...
Delivered by Fri 23 Oct
Analog to Digital Converter - MCP3002
SKU: SF-COM-08636 | Brand: SparkFun
The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...
Delivered by Fri 23 Oct
Fermion: MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0566 | Brand: DFRobot
Fermion: MEMS Volatile Organic Compounds VOC Gas Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA...
Delivered by Fri 23 Oct
Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic
SKU: AF-5233 | Brand: Adafruit
The Adafruit ATtiny817 Breakout with seesaw is a compact development board that combines an ATtiny817 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmw...
Delivered by Fri 23 Oct
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1083 | Brand: Adafruit
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...
Delivered by Fri 23 Oct
10-bit ADC (SPI) - 8 Channel
SKU: PI-COM0206 | Brand: Pimoroni
The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...
Delivered by Fri 23 Oct
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0568 | Brand: DFRobot
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...
Delivered by Fri 23 Oct
Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic
SKU: AF-5690 | Brand: Adafruit
The Adafruit ATtiny1616 Breakout with seesaw is a versatile development board that combines an ATtiny1616 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. It works as both a standalon...
Delivered by Fri 23 Oct
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Fri 23 Oct
10-bit ADC (SPI) - 4 Channel
SKU: PI-COM0205 | Brand: Pimoroni
The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...
Delivered by Fri 23 Oct
Qwiic 24-Bit 4-Channel ADC Breakout - ADS1219
SKU: SF-SEN-27544 | Brand: SparkFun
When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channe...
Delivered by Fri 23 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
