Brands

SKU: PI-COM0406 | Brand: Pimoroni

Classic arcade buttons in a variety of colours. Ever feel the need to relive the glory days of button mashing in your local arcade? Or possibly you just need to add a button to your project and want something a little...

SKU: SF-KIT-15081 | Brand: SparkFun

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to u...

SKU: AF-4026 | Brand: Adafruit

The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidatio...

SKU: KI-5601B | Brand: Kitronik

The Edge Connector Breakout Board for the BBC micro:bit provides easy access to all of the processor pins on the micro:bit's edge connector. Pre-built with pin headers already soldered, it's ready to use straight out ...

SKU: LB-LR0281-5-B | Brand: Little Bird

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in ...

SKU: LB-ETEXTILELED-YG | Brand: Little Bird

A single yellow-green LED module designed for e-textiles projects. Each unit features sewable tabs so it can be stitched directly into fabric using conductive thread. The thicker PCB design makes it more durable than ...

SKU: LB-LS0153B | Brand: Little Bird

Black Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degree...

SKU: AF-1757 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-2315 | Brand: Adafruit

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini cons...

SKU: AF-2305 | Brand: Adafruit

The Adafruit DRV2605L Haptic Motor Controller is a dedicated driver for haptic feedback motors, controlled via I2C. Rather than simple on/off control, the TI DRV2605L chip offers a library of over 100 built-in vibrati...

SKU: AF-2277 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 5mm pitch features 2048 bright RGB LEDs in a 320×160mm panel. The wider pixel spacing makes this panel ideal for viewing from further away, producing clear images and text at distan...

SKU: AF-2414 | Brand: Adafruit

The all-mighty Jimmy from IFixIt is the best way out from an iRock and an iHardPlace. Slide, cut, twist, poke, slice, part, uproot, divide, lift, dissect, separate, and pry your devices to check out the...

SKU: DF-FIT0112 | Brand: DFRobot

A pack of 10 colour-coded alligator-to-alligator clip test cables for quick, hands-free circuit connections. Each cable features strong, grippy clips on both ends and heavy-insulation copper wire — ideal for prototypi...

SKU: DF-FIT0151 | Brand: DFRobot

A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, ci...

SKU: SF-COM-09312 | Brand: SparkFun

The US1881 is a latching Hall effect sensor in a TO-92 package. When exposed to a magnetic field above the operating threshold, the open-collector output latches LOW and stays there until a reversed magnetic field pul...

SKU: DF-FIT0210 | Brand: DFRobot

A pack of 50 crimp pins for 2.54 mm (0.1″) pitch female housing connectors. Use these pins with a crimping tool and compatible housings to create custom cables that mate with standard 2.54 mm male header pins. Specif...

SKU: AF-2830 | Brand: Adafruit

These female stacking headers are made for Adafruit Feather boards, letting you solder headers onto your Feather while keeping access to the pins above the board.Once fitted, your Feather can be plugged into a solderl...

SKU: AF-2890 | Brand: Adafruit

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather ...

SKU: DF-FIT0299 | Brand: DFRobot

This kit includes PHR-2, PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). SPECIFICATIONS Pitch:2.0mm ((0.079")) Current rating:2A AC,DC (AWG #2...

SKU: SF-DEV-14012 | Brand: SparkFun

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-te...